Operation Guide 2872
Altitude Records
Storing altitude data in memory creates an altitude record. If a reading is greater than all of the other altitude readings currently stored in memory, it is stored in the maximum altitude record. The following describes the contents of each type of record.
Recording date (month, day), time (hour, minutes), altitude, and altitude indicator: Up to 41 records
Maximum altitude (including recording date and time) and altitude indicator: 1 record
•The maximum altitude record shows information about the altitude record that has the greatest altitude value. The maximum altitude record is updated any time a reading produces an altitude that is greater than that of the current maximum altitude record.
To store an altitude record in memory
In the Altimeter Mode, hold down D for about one second until the watch beeps twice. This indicates that a record of the altitude reading has been stored in memory.
• You can recall data in memory using the Data
To measure times with the stopwatch
Elapsed Time |
|
|
|
|
| |||
E |
| JE |
| JE |
| JE |
| JA |
Start | Stop |
| Stop | Clear | ||||
Split Time |
|
|
|
|
|
|
| |
E |
| JA |
| JA |
| JE |
| JA |
Start | Split | Split release | Stop | Clear | ||||
|
| (SPL displayed) |
|
|
| |||
Two Finishes |
|
|
|
|
| |||
E |
| JA |
| JE |
| JA |
| JA |
|
|
|
| |||||
Start | Split | Stop | Split release | Clear | ||||
|
| First runner | Second runner | Display time of |
| |||
|
| finishes. | finishes. | second runner. |
| |||
|
| Display time |
|
|
|
|
| |
|
| of first runner. |
|
|
|
|
| |
Minute and Seconds Indicators
Recall Mode.
• Note that there is enough memory to store a total of 41 records. If there are already 41 records in memory, storing another one automatically deletes the oldest record to make room for the new one.
To view altitude record data
1.Use C to enter the Data Recall Mode.
2.Press D to cycle through the altitude record screens in the sequence shown below.
Minute Seconds
indicator indicator
The minute and seconds indicators graphically indicate elapsed time values in the Stopwatch Mode. The seconds indicator acts like the second hand of an analog stopwatch, and moves on the display to indicate the seconds count. The minute indicator acts like the minute hand of an analog stopwatch, and moves on the display to indicate the minute count.
•You can use the following procedure to turn display of the minute and seconds indicators on and off.
Maximum Data | Recording date | Oldest Data | Newest Data |
Altitude indicator |
|
| |
(Month – Day) |
|
| |
| Altitude |
|
|
| Press D. |
|
|
| ▲ |
| ▲ |
▲ | Recording time |
|
|
(Hour : Minutes) |
|
|
• The maximum altitude record appears first. After that, each press of D scrolls through records in sequence, starting from the oldest record.
• If an error occurs while altitude data is being stored in memory or if there is no altitude data in memory, xxxxx is shown for the measured altitude value on the corresponding altitude record screen.
Deleting the Maximum Altitude Record Data
Use the following procedure when you want to delete the data in the maximum altitude record. Note that you can delete maximum altitude record data only.You cannot delete the data of any of the other altitude records.
To delete the maximum altitude record data
1.Use the procedure under “To view altitude record data” to display the maximum altitude record.
•The maximum altitude record is the one with MAX next to the recording time.
2.Hold down A until xxxxx appears in place of the maximum altitude value. This indicates that the data is deleted.
Stopwatch
To turn display of the Stopwatch Mode minute and seconds indicators on and off
| Minute indicator | 1. | With the Stopwatch Mode cleared to all zeros, | |
|
| hold down A until the seconds indicator | ||
Seconds |
|
| starts flashing. This is the setting screen. | |
| 2. | Press D to toggle display of the minute and | ||
indicator |
| On Off | ||
l lll |
| seconds indicators on (indicated when the | ||
l | l |
| minute indicator is displayed) and off (minute | |
l |
| |||
l | l |
|
| |
indicator not displayed).
3.When the setting is the way you want, press A to exit the setting screen.
Countdown Timer
Seconds indicator You can set a countdown timer start time in the
Minute indicator | range of one minute to 60 minutes. An alarm | ||
|
|
| sounds when the countdown reaches zero. An |
|
|
| |
|
|
| restart automatically when the end of a |
|
|
| countdown is reached, and a progress beeper |
|
|
| signals the progress of the countdown. |
•All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C.
Minutes 
Seconds
Timekeeping
Mode time
Configuring the Countdown Timer
Seconds indicator
Minute indicator
1/100
Hourssecond
Seconds
Minutes
Timekeeping Mode time
The stopwatch lets you measure elapsed time, split times, and two finishes. Display of the minute and seconds indicators can be turned on or off.
•The display range of the stopwatch is 9 hours, 59 minutes, 59.99 seconds.
•The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.
•The stopwatch measurement operation continues even if you exit the Stopwatch Mode.
•Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement.
•All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C.
The following are the settings you should configure before actually using the countdown timer.
•Countdown start time
•
•Progress beeper on/off
•Minute, seconds indicator display on/off
Countdown start time
You can set a countdown start time in the range of one minute to 60 minutes, in
Auto-repeat
Whenever zero is reached, the watch beeps and
Progress Beeper
When the progress beeper is turned on, the watch beeps at minute 10, 5, 4, 3, 2, and 1, of the countdown, and at second 50, 40, 30, 20, 10, 5, 4, 3, 2, and 1 of the final minute of the countdown.
Minute and Seconds Indicators
The minute and seconds indicators graphically indicate the Countdown Timer Mode minutes and seconds as they are counted down.You can turn display of these indicators on or off.
4