
Operation Guide 2888
To input the name and then the phone number of new Data Bank record
Name area | 1. In the Data Bank Mode, press C to display the new | |
record screen. | ||
|
| • The new record screen is the one that is blank |
|
| |
|
| (contains no name and telephone number). |
•If the new record screen does not appear when you press C, it means that memory is full. To store
Number area | another record, you will first have to delete some of | ||
New Record Screen | the records stored in memory. | ||
2. Hold down Auntil the flashing cursor (_) appears in | |||
|
| the name area of the display. This is the record input | |
|
| ||
| screen. | ||
|
3. In the name area, use [+] and [÷] to cycle through characters at the cursor position. The characters cycle in the sequence shown below.
[+]
(space) A to Z
@ to -
0 to 9
(alphabet)(symbol)(number)
[÷]
•The above character sequence is for English input. See “Character List” for the character sequences of other languages.
4.When the character you want is at the cursor position, press C to move the cursor to the right.
5.Repeat steps 3 and 4 until the name is complete.
•You can input up to eight characters for the name.
6.After you input the name, press Cas many times as necessary to move the cursor to the number area.
•When the cursor is located at the eighth space of the name area, moving the
cursor to the right causes it to jump to the first digit of the number. When the cursor is at the 15th digit of the number, moving it to the right (by pressing C) causes it to jump to the first character in the name.
•Pressing Cmoves the cursor the right, while Bmoves it to the left.
7.In the number area, use the keypad to input the telephone number.
•Each time you input a digit, the cursor automatically moves to the right.
•The number area initially contains all hyphens. You can leave the hyphens or replace them with numbers or spaces.
•Use [.SPC] to input a space and
•If you make a mistake while inputting numbers, use Cand Bto move the cursor to the location of the error and input the correct data.
•You can input up to 15 digits for the number.
8.Press A to store your data and exit the Data Bank record input screen.
•When you press Ato store data, the name and number you input flash for about one second as Data Bank records are sorted. After the sort operation is complete, the Data Bank record screen appears.
•The name can show only three characters at a time, so longer text scrolls continuously from right to left. The last character is indicated by the symbol s after it.
To input the telephone number and then the name of new Data Bank record
Name area | 1. In the Data Bank Mode, press C to display the new | |
record screen. | ||
|
2.Use the keypad to input the telephone number.
• Pressing a number key as the first input in a new Data
|
|
| Bank record will input the number at the first position |
|
|
| of the number area, and automatically move the |
Number area |
| cursor to the next position to the right. Input the rest of | |
New Record Screen |
| the phone number. | |
|
| • Use [.SPC] to input a space and | |
|
| • | hyphen. |
| l | If you make a mistake while inputting the phone | |
lll |
| ||
ll | l |
| number, press C. This will return to the blank new |
| l |
| |
l |
|
| |
lll |
| record screen, so you can restart your input. | |
|
|
|
• If you do not input anything for about two or three minutes, or if you press B, the watch will exit the input screen and change to the Timekeeping Mode. Anything you have input up to that point will be cleared.
3. After inputting the telephone number, hold down A until the flashing cursor (_) appears in the name area of the display. This is the record input screen.
4. Input the name that goes with the number.
• Use [+] and [÷] to cycle through the characters at the cursor position. Use C and Bto move the cursor. For details about character input, see steps 3 through 5 under “To input the name and then the phone number of new Data Bank record”.
5. After inputting the name, press A to store your data and exit the Data Bank record input screen.
To recall Data Bank records
In the Data Bank Mode, use [+] (+) and [÷]
•See “Sort Table” for details on how the watch sorts records.
•Pressing [+] while the last Data Bank record is on the display displays the new record screen.
To edit a Data Bank record
1.In the Data Bank Mode, use [+] (+) and [÷]
2.Hold down Auntil the flashing cursor appears on the display. This is the record input screen.
3.Use C(right) and B(left) to move the flashing to the character you want to change.
4.Use the keypad to change the character.
•For details about character input, see steps 3 (name input) and 7 (number input) under “To input the name and then the phone number of new Data Bank record”.
5.After making the changes that you want, press Ato store them and exit the Data Bank record input screen.
To delete a Data Bank record
1.In the Data Bank Mode, use [+] (+) and [÷]
2.Hold down Auntil the flashing cursor appears on the display. This is the record input screen.
3.Press B and Cat the same time to delete the record.
•CLR appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input.
4.Input data or press A to return to the Data Bank record screen.
Calculator
You can use the Calculator Mode to perform arithmetic calculations, as well as currency conversion calculations. You can also use the Calculator Mode to turn the input tone on and off.
•All of the operations in this section are performed in the Calculator Mode, which you enter by pressing B.
•Before starting a new calculation or currency conversion operation in the Calculator Mode, first use C to display one of the screens shown below.
|
| Press C. |
Timekeeping | ▲ | ▲ |
|
| |
Mode time | Value input area | |
Calculator Screen |
| Currency Converter Screen |
•Arithmetic and currency conversion calculation input and result values can be up to eight digits for positive values, and seven digits for negative values.
•Exiting the Calculator Mode causes all currently displayed values to be cleared.
How the Cbutton affects the current screen in the Calculator Mode
•Pressing C while the current screen (arithmetic calculator or currency converter screen) shows a value other than zero will clear the screen to zero, without changing to the other screen.
•Pressing C while an E (error) indicator is displayed clears the E (error) indicator, but does not clear the current calculation to zero.
•Pressing C while the current screen (arithmetic calculator or currency converter screen) is cleared to zero, will switch to the other screen.
Performing Arithmetic Calculations
You can perform the following types of arithmetic calculations in the Calculator Mode: addition, subtraction, multiplication, division, arithmetic constants, powers, and approximate values.
To perform arithmetic calculations
When the calculator screen is displayed in the Calculator Mode, you can use the keypad to input calculations just as you do with any standard calculator. See the examples below for details.
•Be sure to press Cto clear the arithmetic calculator
screen to zero before beginning each calculation. If the screen is already cleared, pressing Cwill switch to the
currency converter screen.
• While you are inputting a calculation, values are displayed in the value input area, and operators are displayed in the operator area of the display.
Example |
|
| Operation |
| Display |
(Basic Calculation) | [1] | [2] |
|
|
|
12.3 + 74 - 90 = | [=PM] |
|
| x3 & | |
(12 - 0.5) ⋅ 3 ÷ 7 | [1] | [2] |
|
| 4 9285&14 |
=4.9285714 |
|
|
|
|
|
(Constant Calculation) |
|
|
|
|
|
10 + 7 = 17 | [7] | [+][+][1][0][=PM] | +K | 1& | |
12 + 7 = 19 | [1] | [2] | [=PM] | +K | 19 |
(2.3)4 = 27.9841 | [2] | [.SPC][3][⋅][⋅][=PM][=PM][=PM] | XK | 2& 9841 |
•To perform a constant calculation, input the value you want to use as a constant and
then press one of the arithmetic operator keys twice. This makes the value you input a constant, which is indicated by the n indicator next to the operator symbol.
•An E (error) indicator will appear whenever the result of a calculation exceeds 8 digits. Press C to clear the error indicator. After that, you will be able to continue the calculation using an approximate result.
•The following table describes how to correct input errors and how to clear the calculator after you finish using it.
When you need to do this: | Perform this key operation: |
Correct or change the value you are | Press Cto clear the displayed value |
currently inputting, without deleting the | and return to the 0 display. Next, input |
part of the calculation you have input up | the value you want. |
to the current value |
|
Correct or change the arithmetic operator | Without pressing C, press the key for |
(+, | the correct arithmetic operator. |
Completely clear the calculation you are | Press Cto clear the displayed value |
inputting | and return to the 0 display. Next, press |
| C again. |
Clear a displayed calculation result | Press C. |
(produced by pressing the [+], |
|
[⋅], [÷], or [=PM] key) and its |
|
calculation |
|
Currency Conversion Calculations
You can register a single currency exchange rate for quick and easy conversion to another currency.
•The default conversion rate is ⋅ 0 (multiply the input value by 0). ⋅ represents the multiplication operator and 0 is the exchange rate. Be sure to change the value to the exchange rate value and the operator (multiplication or division) you want to use.
To change the exchange rate and the operator
Operator symbol | 1. While the currency converter screen is displayed in the | |||||
Calculator Mode, hold down A until the exchange rate | ||||||
|
|
|
|
| ||
|
| l | l | ll | starts to flash on the display. This is the setting screen. | |
| l | 2. Use the keypad to input the exchange rate and the | ||||
|
|
| l | |||
| l |
| l | operator ([⋅]or [÷]) you want to use. | ||
| l |
| l | |||
| l |
| ||||
|
| l |
| l | • To clear the displayed exchange rate to zero, press | |
|
|
| l l | |||
| Exchange rate | C. | ||||
| 3. Press Ato exit the setting screen. | |||||
|
|
|
|
|
To check the current exchange rate and operator setting
1.While the currency converter screen is displayed in the Calculator Mode, hold down
A until the exchange rate starts to flash on the display. This is the setting screen.
• The setting screen will also show the current exchange rate and operator setting.
2.Press Ato exit the setting screen.
2