Operation Guide 3136

To set an alarm time

1.In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.

Alarm 1 Alarm 2 Alarm 3 Alarm 4
:00 (Hourly Time Signal)

 

 

Alarm 5

 

 

•To set a one-time alarm, display one of the screens indicated by an alarm number from x1 through x5.

2.After you select an alarm, hold down Auntil the hour setting of the alarm time starts to flash, which indicates the setting screen.

•This operation turns on the alarm automatically.3.Press Cto move the flashing between the hour and minute settings.4.While a setting is flashing, use D(+) and B (–) to change it.

•When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (AM indicator) or p.m. (PM indicator).

5.Press Ato exit the setting screen.

To set the countdown start time

1. In the Countdown Timer Mode, hold down Auntil the hours of the countdown start time start to flash, which indicates the setting screen.

2. Press Cto move the flashing between the hours and minutes.3. While a setting is flashing, use D (+) or B (–) to change it.•To set the starting value of the countdown time to 24 hours, set 0:00.4.Press Ato exit the setting screen.

Reference

This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the watch is in.

•To stop the alarm tone after it starts to sound, press any button.To test the alarmIn the Alarm Mode, hold down D to sound the alarm.To turn an alarm on and off
Alarm on indicator1. In the Alarm Mode, use D to select an alarm.
2. Press Ato toggle it on (the alarm on indicator

 

displayed) and off (the alarm on indicator not

 

displayed).

 

•

Button Operation Tone
Mute indicator

The button operation tone sounds any time you press one of the watch’s buttons. You can turn the button operation tone on or off as desired.

•Even if you turn off the button operation tone, the alarm, Hourly Time Signal, and Countdown Timer Mode alarm all operate normally.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the display), hold down Cfor about three seconds to toggle the button operation tone on (mute indicator not displayed) and off (mute indicator displayed).

 

Turning on a daily alarm (x1 through x5) displays the

 

alarm on indicator on its Alarm Mode screen.

 

• In all modes, the alarm on indicator is shown for any

 

alarm that is currently turned on.
To turn the Hourly Time Signal on and off
Hourly time signal1. In the Alarm Mode, use Dto select the Hourly Time
Signal (SIG).
on indicator2. Press Ato toggle it on (the hourly time signal on

 

indicator displayed) and off (the hourly time signal on

 

indicator not displayed).

 

• The Hourly Time Signal on indicator is shown on the

 

display in all modes while the Hourly Time Signal is

 

turned on.

Stopwatch

•Holding down Cto turn the button operation tone on or off also causes the watch’s current mode to change.

•The mute indicator is displayed in all modes when the button operation tone is turned off.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls at high speed.

Initial Screens

When you enter the World Time or Alarm Mode, the data you were viewing when you last exited the mode appears first.

World Time

• The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

• The current time in all World Time Mode cities is calculated in accordance with the

Greenwich Mean Time (GMT) differential for each city, based on the current Home
1/100 second

Mode indicator

Hours Seconds Minutes
The stopwatch lets you measure elapsed time, split times, and two finishes.•The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement.

•All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C.

City time setting in the Timekeeping Mode.

• The GMT differential is the time difference of the time zone where the city is located

from Greenwich Mean Time.

• GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC) data.

City Code Table

City

City

GMT

Other major cities in same time zone

Code

Differential

 

 

PPG

Pago Pago

–11.0

 

HNL

Honolulu

–10.0

Papeete

ANC

Anchorage

–09.0

Nome

LAX

Los Angeles

–08.0

San Francisco, Las Vegas, Vancouver, Seattle, Dawson City

Elapsed time measurement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

StartStopRe-start

Stop

Clear
Split time measurement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start

SplitSplit release

Stop

Clear

 

 

(SPL displayed)

 

 

 

 

 

Split time and 1st-2nd place times

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start

Split

Stop

Split release

Clear

 

 

First runnerSecond runnerDisplay time of

 

 

 

finishes.

finishes.

second runner.

 

 

 

Display time of

 

 

 

 

 

 

 

first runner.

 

 

 

 

 

Countdown Timer

DEN

Denver

–07.0

El Paso, Edmonton

CHI

Chicago

–06.0

Houston, Dallas/Fort Worth, New Orleans, Mexico City,

Winnipeg

 

 

 

NYC

New York

–05.0

Montreal, Detroit, Miami, Boston, Panama City, Havana,

Lima, Bogota

 

 

 

CCS

Caracas

–04.0

La Paz, Santiago, Port Of Spain

YYT

St. Johns

–03.5

 

RIO

Rio De Janeiro

–03.0

Sao Paulo, Buenos Aires, Brasilia, Montevideo

RAI

Praia

–01.0

 

LON

London

+00.0

Dublin, Lisbon, Casablanca, Dakar, Abidjan

PAR

Paris

+01.0

Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,

Frankfurt, Vienna, Stockholm

 

 

 

CAI

Cairo

+02.0

Athens, Helsinki, Istanbul, Beirut, Damascus, Cape Town

JRS

Jerusalem

 

 

JED

Jeddah

+03.0

Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow

THR

Tehran

+03.5

Shiraz

DXB

Dubai

+04.0

Abu Dhabi, Muscat

KBL

Kabul

+04.5

 

KHI

Karachi

+05.0

Male

DEL

Delhi

+05.5

Mumbai, Kolkata, Colombo

DAC

Dhaka

+06.0

 

RGN

Yangon

+06.5

 

BKK

Bangkok

+07.0

Jakarta, Phnom Penh, Hanoi, Vientiane

HKG

Hong Kong

+08.0

Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,

Ulaanbaatar

 

 

 

TYO

Tokyo

+09.0

Seoul, Pyongyang

Mode indicator

Hours Seconds Minutes

The countdown timer can be set within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero.

•The countdown operation continues even if you exit the Countdown Timer Mode.•All of the operations in this section are performed in theCountdown Timer Mode, which you enter by pressing

C.

To use the countdown timerPress Dwhile in the Countdown Timer Mode to start the countdown timer.

•When the end of the countdown is reached, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is reset to its starting value automatically after the alarm stops.

ADL

Adelaide

+09.5

Darwin

SYD

Sydney

+10.0

Melbourne, Guam, Rabaul

NOU

Noumea

+11.0

Port Vila

WLG

Wellington

+12.0

Christchurch, Nadi, Nauru Island

*Based on data as of June 2007.

•Press D while a countdown operation is in progress to pause it. Press Dagain to resume the countdown.

•To stop a countdown operation completely, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value.

2