Operation Guide 3215 3222
Screen: | To do this: |
| Do this: | |
| Change the year, month, or day | Press D(+) and | ||
|
|
| ||
/ | Toggle the button operation tone between | Press D. | ||
| (on) and | (off) |
| |
|
|
| ||
| Toggle the illumination duration between | Press D. | ||
|
| (approximately 1.5 seconds) and |
| |
|
| (approximately 3 seconds). |
| |
| Toggle between Power Saving on ( ) and | Press D. | ||
| off ( | ) |
|
|
5. Press Atwice to exit the setting screen.
•For details about the Button Operation Tone, see “To turn the button operation tone on and off” (page
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.
The time calibration signals transmitted from Mainflingen (Germany), Anthorn (England), or Fort Collins (the United States) include both Standard Time and DST data. When the Auto DST setting is turned on, the watch switches between Standard Time and DST (summer time) automatically in accordance with the signals.
•Though the time calibration signals transmitted by the Fukushima and Fukuoka/ Saga, Japan transmitters include summer time data, summer time currently is not implemented in Japan (as of 2008).
•The default DST setting is Auto DST (
) whenever you select LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW, TYO, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, or YYT as your Home City code.
•If you experience problems receiving the time calibration signal in your area, it probably is best to switch between Standard Time and Daylight Saving Time (summer time) manually.
Transmitter | Covered City Codes |
Japan | TPE, SEL, TYO |
China | HKG, BJS |
U.S. | HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, YYT |
Europe (U.K., Germany) | LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW |
None | All other city codes |
4.When the setting you want is selected, press Atwice to exit the setting screen.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
•Auto DST ( 
) can be selected only while LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW,TPE, SEL, TYO, HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, or YYT is selected as the Home City code. For more information, see “Daylight Saving Time (DST)” (page
•The day of the week is displayed automatically in accordance with the date (year, month, and day) settings.
12-hour and 24-hour timekeeping
•With the
•With the
•The
To change the Daylight Saving Time (summer time) setting
|
|
| 1. In the Timekeeping Mode, hold down A until the city | |
|
|
| code starts to flash, which indicates the setting screen. | |
l l l | ll | 2. Press Cand the DST setting screen appears. | ||
3. Press Dto cycle through the DST settings in the | ||||
l |
| |||
l |
| l | ||
l |
|
|
| |
l |
| l | sequence shown below. | |
| l l l | |||
|
| |||
Auto DST (
) 
DST off (
) 
DST on (
)
DST indicator
•If you change your Home City to one that is within the same transmitter area, the current DST setting will be retained. If you change to a city that is outside your current transmitter area, DST will be turned off automatically.
Tide Site Name
Selecting a Tide Site Name
The tide site names you can select depend on your current Home City setting.
•Select the tide site name in the Timekeeping Mode.
•After configuring the settings for your Home City, press Aonce to display the tide site name selection screen.
•Note that the tide sites you can select are those located in the same time zone as your Home City. They are not necessarily located near your Home City.
To configure tide site settings
|
|
| 1. In the Timekeeping Mode, hold down Afor about two |
| ll l l l |
| seconds until the city code starts to flash. This is the |
l |
| l | setting screen. |
l |
| ||
| l |
| |
l | l | • The watch will exit the setting screen automatically if | |
| l l l ll |
| |
|
|
| you do not perform any operation for about two or |
three minutes.
l | l |
| |
l |
|
l | |
| l |
l l
l |
|
|
l l |
| |
| l | |
|
| l |
l l | l | l |
|
| |
2.Press Aonce to display the tide site name selection screen.
•The current tide site name will be on the display and SET will flash.
3.Press D(forward) and B(back) to scroll through the tide site names until the one you want is displayed.
•If the tide site name is longer than four characters, the name will scroll from right to left on the display.
•A tide site that does not have any data assigned to it displays the name “USER”.
4.When all of the settings are the way you want, press A to exit the setting screen.
•The tide graph in the Timekeeping Mode shows information for the site you select here.
•The tide site candidates are those with the same UTC differential as the current Home City. If you cannot find the site you want, you can select “USER”.
•Only “USER” sites may be available for some city codes.
•Setting an accurate high tide time will allow the watch to produce accurate tide readings. Especially when “USER” is selected as the site, make sure that you input an accurate high tide time (page
•Only a “USER” site can be selected while UTC is selected as the Home City.
Reference
This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.
Moon Phase Indicator
Module 3215 | The Moon phase indicator of this watch indicates the | ||
l | ll | current phase of the Moon as shown below. It is based on | |
l | the view of the left side of the moon at meridian transit | ||
ll |
| l | |
l |
| l |
|
ll |
| from the northern hemisphere of the Earth. If the | |
|
|
| appearance of the Moon phase indicator is reversed from |
Moon Phase indicator | the actual Moon as viewed from your location, you can | ||
use the procedure under “To reverse the displayed Moon | |||
Module 3222 | phase” (page | ||
l | ll |
| |
| l |
| |
l |
| l |
|
l |
|
| |
l |
| l |
|
ll |
|
| |
|
|
|
| |
|
| (part you cannot see) | Moon phase (part you can see) | |
Moon | Module |
|
|
|
Phase | 3215 |
|
|
|
Indicator |
|
|
|
|
| Module |
|
|
|
| 3222 |
|
|
|
Moon Age | ||||
|
| New |
| First |
Moon Phase | Moon |
| Quarter | |
|
|
|
| (Waxing) |