Operation Guide 3242
5. Press D or B to toggle the target time on and off. |
Target time on indicator
Hour
Mode
indicator Seconds
Minutes
1.While the display is showing all zeros in the Stopwatch Mode, hold down A, and the hour digit of the target time starts to flash because it is selected.
2.Press C to change the selection in the following sequence.
| C |
| C |
| |||
Hour |
|
| Minutes |
|
| Seconds |
|
|
|
|
|
|
|
|
|
C
3.Press D to increase the selected number or B to decrease it. Holding down either button changes the selection at high speed.
ξPress D and B at the same time to clear the setting to 0:00' 00".
4.Press A to move the flashing to the target time ON/ OFF setting.
6. Press A to return to the Stopwatch Mode. |
The alarm will not sound if you do not turn on the target time.
ξPress A, C or L to stop the alarm after it starts to sound.
|
|
Alarm Mode
3. Press D to increase the selected digits and B to decrease them. Holding down |
either button changes the selection at high speed. |
Hourly time signal on indicator
Alarm on indicator
Current time
Hour
Mode indicator
Minutes
When the Daily Alarm is switched on, the alarm sounds for 20 seconds at the preset time each day. Press any button to stop the alarm after it starts to sound. When the Hourly Time Signal is on, the watch beeps every hour on the hour.
To set the alarm time1.Hold down A until the hour digits start to flash on the display. The hour digits flash because they are selected.
ξThis operation will switch the Daily Alarm on automatically.
2.Press C to change the selection in the following sequence.
C
Hour | Minutes |
ξ The format |
for regular timekeeping. |
ξ When setting the alarm time using the |
correctly as morning (no indicator) or afternoon (P). |
4. After you set the alarm time, press A to return to the Alarm Mode. |
To turn the daily alarm and hourly time signal on and off
Press B while in the Alarm Mode to change the status of the daily alarm and hourly time signal in the following sequence.
B 
B 
B
Both OFF | Daily Alarm | Hourly Time | Both ON |
| Only | Signal Only |
|
|
| B |
|
ξThe alarm on indicator (
) and the Hourly Time Signal on indicator (
) are shown on the display in all modes while these functions are turned on.
Dual Time Mode
To test the alarm sound
Hold down B while in the Alarm Mode to sound the alarm.
ξNote that pressing B also changes the alarm and the hourly time signal ON/OFF settings.
Hour
Current time
Mode indicator
Minutes
The Dual Time Mode lets you keep track of the time in another time zone. You can also select the timekeeping format
To set the Dual Time
1.Hold down A while in the Dual Time Mode. The hour digits flash on the display because they are selected.
2.Press C to change the selection in the following sequence.
C
Hour | Minutes |
3.Press D to increase the selected digits and B to decrease them. Holding down either button changes the selection at high speed.
4. After you set the time, press A to return to the Dual Time Mode.
ξIn the Dual Time Mode, the seconds count is synchronized with the seconds count of the Timekeeping Mode.
ξIn the Dual Time Mode, press B to toggle between the
Specifications
Accuracy at normal temperature: ±30 seconds a monthTimekeeping: Hour, minutes, seconds, pm (P), day of the week, month, day Time format:
Calendar system: Full
Others: Auto repeat function, Progress beeper function
StopwatchMeasuring unit: 1/100 second
Measuring capacity: 23 hours 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time and two finishes
Others: Target Time Alarm,
Alarm: Daily alarm, hourly time signal
Dual Time
|
|
Illumination: EL Backlight
Battery: One lithium battery (Type: CR1616)
Battery life: 3 years under the following conditions
ξOne
ξOne