Using the Geometry Application
Drawing an Ellipse with Foci
a.Tap mand then G
b.Tap the 2nd nand select the ellipse with foci icon
c.Tap twice (about 1 inch apart)
d.Tap a third time and drag until you are happy
Adding Segments and Selecting
a.Tap the 2nd n and select the segment icon
b.Tap point A and then point C
c.Tap point B and then point C (Notice the status bar as you tap!)
d.Select the 1st toolbar button (G) to change to select mode
e.Tap point C, let go, and then press on C and drag to move it
Displaying Measure
a.Tap the right most uto discover the
Measurement Box
b.Tap in any white space to deselect C
c.Tap segment AC to select it
d.Tap segment BC to select it
e.Tap nand select Q(if needed)
f.Tap Qto put the angle value in the Geometry window
g.Select point C and drag – your angle measure updates as you move
CASIO ClassPad 330 and ClassPad Manager Software Version 3.04 | 15 |
Copyright © 2009 CASIO COMPUTER CO., LTD. All Rights Reserved. |
|