Operation Guide 3353 3354 5053

To select a transmitter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transmitter indicator

1.In the Timekeeping Mode, hold down Auntil the transmitter indicator starts to flash, which indicates the setting screen.

The second hand will move at high speed to the 12 o’clock position, where it will stop.

2.Use Dto scroll through available transmitter settings until the one you want to select is displayed.

To set up the watch to do this:

Select this transmitter setting:

Automatically select the Anthorn or Mainflingen signal

AT

Receive the Mainflingen signal

DCF

Receive the Anthorn signal

MSF

Note that ---appears in place of the transmitter indicator when any city code besides LON, PAR, BER, or ATH is selected as the Home City code. This indicates that you cannot specify a transmitter.

3.Press A twice to exit the setting screen.

Reception can take up to 14 minutes when the AT option is selected.

The second hand will advance at high speed to the correct position in accordance with seconds count of the digital time, and resume normal movement from there.

Timekeeping

Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes.

The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

The year can be set in the range of 2000 to 2099.

The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced or when battery level drops to Level 4.

The current time for all city codes in the Timekeeping Mode and World Time Mode is calculated in accordance with the Greenwich Mean Time (GMT) differential for each city, based on your Home City time setting.

GMT differential is calculated by this watch based on Coordinated Universal Time

(UTC*) data.

*UTC is the world-wide scientific standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that keep time accurately to within microseconds. Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s rotation. The reference point for UTC is Greenwich, England.

12-hour/24-hour Timekeeping Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also applied in all other modes.

With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59 without any indicator.

Illumination Precautions

The illumination provided by the light may be hard to see when viewed under direct sunlight.

Illumination automatically turns off whenever an alarm sounds.

Frequent use of illumination shortens the battery operating time.

City Code Table

City

City

GMT

Other major cities in same time zone

Code

Differential

 

 

– – –

 

–11.0

Pago Pago

HNL

Honolulu

–10.0

Papeete

ANC

Anchorage

–09.0

Nome

LAX

Los Angeles

–08.0

San Francisco, Las Vegas, Vancouver,

Seattle/Tacoma, Dawson City

 

 

 

DEN

Denver

–07.0

El Paso, Edmonton, Culiacan

CHI

Chicago

–06.0

Houston, Dallas/Fort Worth,

New Orleans, Mexico City, Winnipeg

 

 

 

NYC

New York

–05.0

Montreal, Detroit, Miami, Boston,

Panama City, Havana, Lima, Bogota

 

 

 

CCS*

Caracas

–04.0

La Paz, Santiago, Port Of Spain

RIO

Rio De Janeiro

–03.0

Sao Paulo, Buenos Aires, Brasilia, Montevideo

– – –

 

–02.0

 

– – –

 

–01.0

Praia

GMT

 

+00.0

Dublin, Lisbon, Casablanca, Dakar, Abidjan

LON

London

 

 

 

PAR

Paris

+01.0

Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,

BER

Berlin

Frankfurt, Vienna, Stockholm

 

ATH

Athens

 

Helsinki, Istanbul, Beirut, Damascus,

CAI

Cairo

+02.0

Cape Town

JRS

Jerusalem

 

 

JED

Jeddah

+03.0

Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow

THR

Tehran

+03.5

Shiraz

DXB

Dubai

+04.0

Abu Dhabi, Muscat

KBL

Kabul

+04.5

 

KHI

Karachi

+05.0

Male

DEL

Delhi

+05.5

Mumbai, Kolkata, Colombo

DAC

Dhaka

+06.0

 

RGN

Yangon

+06.5

 

BKK

Bangkok

+07.0

Jakarta, Phnom Penh, Hanoi, Vientiane

HKG

Hong Kong

+08.0

Singapore, Kuala Lumpur, Beijing, Taipei, Manila,

Perth, Ulaanbaatar

 

 

 

SEL

Seoul

+09.0

Pyongyang

TYO

Tokyo

 

 

 

ADL

Adelaide

+09.5

Darwin

SYD

Sydney

+10.0

Melbourne, Guam, Rabaul

NOU

Noumea

+11.0

Port Vila

WLG

Wellington

+12.0

Christchurch, Nadi, Nauru Island

Based on data as of June 2007.

The rules governing global times (GMT differential and UTC offset) and summer

time are determined by each individual country.

*In December 2007, Venezuela changed its offset from –4.0 to –4.5. Note however, that this watch displays an offset of –4.0 (the old offset) for the CCS (Caracas, Venezuela) city code.

6