Operation Guide 3311/3356

❚Elapsed Time Measurement

Start

Stop

Reset

Configuring Time and Date Settings Manually

Pressing the A button while timing is stopped resets the stopwatch to all zeros.

Cumulative Time Measurement

Pressing the D button to restart the stopwatch without resetting it to all zeros causes the elapsed time measurement to resume from where it was last stopped.

If you are planning to manually adjust both the digital and analog settings, be sure to adjust the digital setting first.

❚Split Time Measurement

Start

Record Split

Clear Split

Stop

Reset

Pressing the A button while timing is being performed displays the split time screen, but timing continues internally.

•Changing to another mode while a split time is displayed clears the split time operation.

❚1st and 2nd Place Finishers

Start

1st Finish

2nd finish

Displays time of 2nd finisher.

Reset

 

(Displays time of 1st finisher.)

 

 

 

Pressing the D button while the split time screen is on the display stops elapsed time measurement, and leaves the split time screen on the display. Press the A button to exit the split time screen and display the elapsed time when the measurement was stopped.

Split Time ScreenSplit IndicatorMinutes Seconds1/100 Second

The split time screen cycles alternately cycle through the split indicator, a minute/second screen, and a 1/100 second screen.

Time and Date Settings

Timekeeping Mode

(Hold down about two seconds.)

Transmitter Selection

Home City Code

Mode

 

Auto Receive

Summer Time

12/24-hour

timekeeping Seconds Hour Minute Year

Power

Saving Language Day Month

•While the setting screen (the one with a flashing setting) is on the display, use the C and Abuttons to move the flashing between settings.

•Displays Setting Screen

•Changes Setting Group

•Exits Setting Screen

(Selects Setting)

You can select either Japanese (kanji) or English for the day of the week indicator.

•For more information, see “To configure digital settings”.

Day of the Week Indicators

Sunday: SU/ 日

Monday: MO/ 月

Tuesday: TU/ 火

Wednesday: WE/ 水

Thursday: TH/ 木

Friday: FR/ 金

Saturday: SA/ 土

 

 

See “Signal Reception Settings” for information about calibration signal, Home City, summer time, and auto receive settings.

❚To configure digital settings

1. In the Timekeeping Mode

Timekeeping Mode

hold down the Abutton

 

for about two seconds.

 

• This will display the transmitter selection mode setting screen and cause the second hand to move to the 12 o’clock position.

(Enters/Exits Setting Screen) (Scrolls Back)

(Changes Selection) (Scrolls Forward)

2.

Press the A button to

(Changes Setting Group)

 

advance to the next group

 

 

of settings.

 

•

This causes the 12/24-hour

 

 

timekeeping setting to flash.

 

Example: 12H (12-hour timekeeping)

3. Press the Cbutton so the setting you want to change is flashing on the display.

• Use the C button to cycle

(Selects Setting)

through the settings shown below. Each press of the C button causes the next setting to flash.

12/24-hour

Timekeeping Second Hour Minute Year

Power Saving Language Day Month

4. While the 12/24-hour timekeeping setting is flashing, press the D button to select the setting you want.

(Toggles)

•Pressing the Dbutton toggles the timekeeping format between 12-hour (12H) and 24-hour (24H).

5.

To restart the seconds

 

 

count to 00, press the D

 

 

button.

 

•

While the seconds are

 

 

selected, press the Dbutton

(Zero Reset)

 

to reset them to 00 in

 

 

 

accordance with the time

 

 

signal on the radio, TV, etc.

 

•Pressing the D button while the seconds count is in the range of 30 to 59 resets it to 00 and also adds 1 to the minutes. Pressing the D button in the range of 00 to 29 resets the seconds count without changing the minutes.

•Pressing the B button while the seconds count is flashing changes the display illumination duration. See “To specify display illumination duration” for more information.

6.

While the hour, minutes,

(Back)

 

 

year, month, or day setting

 

 

is flashing, use the D (+)

 

 

and B(–) buttons to

 

 

change the setting.

 

•

Holding down either button

(Forward)

 

changes the setting at high

 

 

speed.

 

•When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly, or that you specify the correct 24-hour time.

•You can set a date in the range of January 1, 2000 to December 31, 2099.

•The day of the week is set automatically in accordance with the date you set.

•The watch automatically makes adjustments for leap years and month lengths.

7.

Japanese (Kanji)

While the day of the week

 

setting is flashing, press

 

the D button to toggle it

 

between Japanese (kanji)

 

and English.

(Toggles)

8. While the Power Saving setting is flashing, press the D button to toggle it on (ON) or off (OF).

(Toggles)

Use the Cbutton to select each of the settings and the D and Bbuttons to change them.

9. When all of the settings are the way you want, press the Abutton.

• This exits the setting screen.

• The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

8