Operation Guide 3311/3356

Digital-Analog Synchronization

After adjustment of the digital time, the watch automatically adjusts its analog setting to match.

• When adjusting the analog time, the hands may move clockwise

or counterclockwise.

Ajusting the Analog Time Setting

You can use the Hand Setting Mode to manually adjust the analog time when it does not match the digital time.

2. If the second hand does not align properly with the 12 o’clock position, press the D button to adjust it.

High-speed Lock

•

While holding down the D button to start high-speed clockwise

 

movement of the hands, press the Bbutton to lock the

 

high-speed hand movement. You can then release the buttons.

•

While holding down the B button to start high-speed

•

Depending on how many hours different the digital and analog

 

time settings are, it may take some time for the analog hand

 

setting procedure to be finished.

•

After adjustment of the hour and minute hand, the second hand

 

will adjust automatically to the digital time.

Timekeeping Mode

(5 times)

1. In the Hand Setting Mode, hold down the A button for about two seconds.

•This will cause the second hand to move to 12 o’clock, and “–00–” to flash on the digital display.

Hand Setting Mode

Mode Indicator

Hand Setting Mode

• Each press of the Dbutton advances the second hand one second.

•Holding down the Dbutton advances the second hand at high speed.

3.Press the C button.

•This will cause the hour and minute setting of the digital

time to flash on the display.

(Selects Setting)

4. Use the D(+) and B (–) buttons to adjust the hour and minute hands.

• Each press of the Dbutton moves the hands 20 seconds clockwise, while the B button moves them 20 seconds counterclockwise.

•Holding down either button moves the hands at high speed.

(Forward)

(Back)

(Forward)

counterclockwise movement of the hands, press the D button to

lock the high-speed movement. You can then release the buttons.

• High-speed hand movement will continue until it completes a

12-hour cycle, or until you press any button to stop it.

5. When the setting is the way you want, press the Abutton.

•This exits the setting screen

and automatically synchronizes the minute hand with the current seconds count.

•At this time, the second hand will adjust automatically to the digital time.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

9