Casio 3726 City Code Table, Timekeeping, Illumination Precautions, GMT, City, City, Code, Module, Module, Transmitters, In this case:, In this case:, The watch does this:

Operation Guide 3725 3726

Transmitters

This watch is designed to receive the time calibration signal transmitted from Rugby, England and the signal from Mainflingen, Germany. You can select either one of the transmitters, or you can configure the watch to automatically select the transmitter that has the strongest signal.

•The following explains how the watch determines which transmitter it should check first while the watch is configured for auto transmitter search (AvtA).

Module 3725

In this case:	The watch does this:
The first signal auto search operation	1. Checks the Mainflingen signal first.
after factory default settings are in effect,	2. If the Mainflingen signal cannot be
or after the city code has been changed	received, checks the Rugby signal.
Any case other than the above.	1. Checks the last successfully received
	signal first.
	2. If the last successfully received signal
	cannot be received, checks the other
	signal.
Module 3726
In this case:	The watch does this:
The first signal auto search operation	1. Checks the Rugby signal first.
after factory default settings are in effect,	2. If the Rugby signal cannot be received,
or after the city code has been changed	checks the Mainflingen signal.
Any case other than the above.	1. Checks the last successfully received
	signal first.
	2. If the last successfully received signal
	cannot be received, checks the other
	signal.

•Since the watch checks signals from both transmitters when AvtA is selected as the transmitter setting, signal reception can take as long as 14 minutes.

3725	• To find out the module number of your watch, look at its
	back cover. The Module number (3725 or 3726) is
3726	engraved inside the box on the back cover.

Timekeeping

•Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s batteries replaced or when battery power drops to Level 4.

•The current time for all city codes in the Timekeeping Mode and World Time Mode is calculated in accordance with the Greenwich Mean Time (GMT) differential for each city, based on your Home City time setting.

•GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC*) data.

*UTC is the world-wide scientific standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that keep time accurately to within microseconds. Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s rotation. The reference point for UTC is Greenwich, England.

12-hour/24-hour Timekeeping Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also applied in all other modes.

•With the 12-hour format, the PM indicator ( ) appears on the bottom dial for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.

Illumination Precautions

•Illumination may be hard to see when viewed under direct sunlight.

•Illumination automatically turns off whenever an alarm sounds.

•Frequent use of illumination runs down the batteries.

Auto light switch precautions

•The auto light switch is turned off automatically whenever battery power is at Level 3.

•Wearing the watch on the inside of your wrist, movement of your arm, or vibration of your arm can cause frequent activation of the auto light switch and illumination of the digital display areas. To avoid running down the batteries, turn off the auto light switch whenever engaging in activities that might cause frequent illumination.

•Note that wearing the watch under your sleeve while the auto light switch is turned on can cause frequent illumination of the digital display areas and can run down the batteries.

More than 15 degrees	• Illumination may not turn on if the face of the watch is
too high	more than 15 degrees above or below parallel. Make
	sure that the back of your hand is parallel to the ground.
	• Illumination turns off after the preset illumination
	duration (see “To set the current digital time and date
	manually”), even if you keep the watch pointed towards
	your face.

•Static electricity or magnetic force can interfere with proper operation of the auto light switch. If illumination does not turn on, try moving the watch back to the starting position (parallel with the ground) and then tilt it back towards you again. If this does not work, drop your arm all the way down so it hangs at your side, and then bring it back up again.

•Under certain conditions, illumination may not turn on until about one second after you turn the face of the watch towards you. This does not necessarily indicate malfunction of the auto light switch.

•You may notice a very faint clicking sound coming from the watch when it is shaken back and forth. This sound is caused by mechanical operation of the auto light switch, and does not indicate a problem with the watch.

City Code Table

City	City	GMT	Other major cities in same time zone
Code		Differential
– – –		–11.0	Pago Pago
HNL	Honolulu	–10.0	Papeete
ANC	Anchorage	–09.0	Nome
LAX	Los Angeles	–08.0	San Francisco, Las Vegas, Vancouver,
			Seattle/Tacoma, Dawson City
DEN	Denver	–07.0	El Paso, Edmonton
CHI	Chicago	–06.0	Houston, Dallas/Fort Worth,
			New Orleans, Mexico City, Winnipeg
NYC	New York	–05.0	Montreal, Detroit, Miami, Boston,
			Panama City, Havana, Lima, Bogota
CCS	Caracas	–04.0	La Paz, Santiago, Port of Spain
RIO	Rio De Janeiro	–03.0	Sao Paulo, Buenos Aires, Brasilia, Montevideo
– – –		–02.0
– – –		–01.0	Praia
GMT		+00.0	Dublin, Lisbon, Casablanca, Dakar, Abidjan
LON	London
PAR	Paris	+01.0	Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
BER	Berlin		Frankfurt, Vienna, Stockholm, Barcelona
ATH	Athens		Helsinki, Istanbul, Beirut, Damascus,
CAI	Cairo	+02.0	Cape Town
JRS	Jerusalem
JED	Jeddah	+03.0	Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
THR	Tehran	+03.5	Shiraz
DXB	Dubai	+04.0	Abu Dhabi, Muscat
KBL	Kabul	+04.5
KHI	Karachi	+05.0	Male
DEL	Delhi	+05.5	Mumbai, Kolkata
DAC	Dhaka	+06.0	Colombo
RGN	Yangon	+06.5
BKK	Bangkok	+07.0	Jakarta, Phnom Penh, Hanoi, Vientiane
HKG	Hong Kong	+08.0	Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,
			Ulaanbaatar
SEL	Seoul	+09.0	Pyongyang
TYO	Tokyo
ADL	Adelaide	+09.5	Darwin
SYD	Sydney	+10.0	Melbourne, Guam, Rabaul
NOU	Noumea	+11.0	Port Vila
WLG	Wellington	+12.0	Christchurch, Nadi, Nauru Island

•Based on data as of December 2003.

6