Casio 3747, 4772 Time Recorder, Stopwatch, Date Alert, Alarm Operation, Stop, Stop, Stop, Stop, Start, Clear, Start, Split, Clear, Start, Split, Clear, Module, Module, Alert On

Operation Guide COMBIWAVE1

5. Press A to exit the setting screen.

•With the target alarm (TAL), the time starts to countdown as soon as you set the alarm time.

Countdown	Countdown
	(Seconds)
(Hours : Minutes)
2 seconds	l	l
		l
▲
	l l
	l l
	l l
		l

Target Alarm Screen

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off.

The target alarm counts the time remaining from the current Home City time to the target alarm time. Note that the target alarm repeats automatically each day, as long as it is turned on. You need to turn off the target alarm to disable it.

•Pressing any button stops the alarm tone operation.

•Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen Displaying the snooze alarm setting screen

To test the alarm

In the Alarm Mode, hold down Dto sound the alarm.

To turn an alarm on and off

1. In the Alarm Mode, use Dto select an alarm.

Alarm on indicator	2. Press Ato toggle it on and off.
	• Turning on a one-time alarm (AL1, AL2, AL3,
	TAL) displays the alarm on indicator on its Alarm
	Mode screen. Turning on the snooze alarm (SNZ)

	displays the alarm on indicator and snooze alarm
	indicator on its Alarm Mode screen.
Snooze alarm indicator
	• In all modes, the alarm on indicator is shown for any
Modules 2735 and 4772	alarm that is currently turned on. When the snooze
Alarm on indicator	alarm is on, the snooze alarm indicator is displayed in all
	modes.

•The alarm on indicator flashes while the alarm is sounding.

•The snooze alarm indicator flashes during the 5-minute intervals between alarms.

Snooze alarm indicator

Module 3747

To turn the Hourly Time Signal on and off

1.In the Alarm Mode, use Dto select the Hourly Time Signal (SIG).

2.Press Ato toggle it on (the Hourly Time Signal on indicator displayed) and off (the Hourly Time Signal on

indicator not displayed).•The Hourly Time Signal on indicator is displayed in allHourly time signal modes when the Hourly Time Signal is turned on. on indicator

Modules 2735 and 4772

Hourly time signal on indicator

Module 3747

To turn an alert on and off	1. In the Date Alert Mode, use Dto select the screen for
	the alert (DA1 through DA5) whose alert type you
	want to select.
	2. Press Ato toggle it on and off.
Alert On	• Note that the month and day do not appear if the alert is
	turned off.
▲
Press A.
▲
Alert Off
Time Recorder
Current time	The Time Recorder Mode lets you store up to 30 time
	entries (month, day, hour, minutes) with the touch of a
(Hour : Minutes)	button. One way you can use the Time Recorder Mode is
	to record the start time and the end time of a particular
	event.

•All of the operations in this section are performed in the Time Recorder Mode, which you enter by pressing C.

Standby Screen	To record a Time Recorder time
	1. Use C to enter the Time Recorder Mode.

•This displays the Time Recorder standby screen.2.Press Dto record the current date and time (month, day, hour, minutes).

•The recorded time flashes for about two seconds and then assigned the next available record number, in the range of T1through T30. Next the time recorder standby screen appears.

•A new time is recorded each time you press Dwhile the standby screen is on the display.

•Records are assigned numbers sequentially from T1through T30.

•Storing a new time record when there are already 30 records stored in memory automatically deletes record T1, shifts the remaining records upwards by 1, and stores the new record as T30.

To recall Time Recorder times

1.In the Time Recorder Mode, press Ato recall Time Recorder times.

•If there are no time recorder times currently in memory, the standby screen remains on the display when you press A.

2.Use D to scroll through times stored in memory.Recorded date (Month – Day)Recorded time (Hour : Minutes)Alternate at two-second intervalTime record number

•Each press of Dscrolls through time records from higher numbered (newer) records to lower numbered records.

•If you recorded a new Time Recorder time since you last entered the Time Recorder Mode, the newest record appears first. If you have not recorded a new time, the record you were viewing when you last exited the Time Recorder Mode appears first.

•Press Ato return to the standby screen.

To delete all Time Recorder times

Enter the Time Recorder Mode. While holding down A, press Dto delete all Time Recorder times.

Stopwatch

Date Alert

Date Alert helps you to remember an important date. After you set an alert date (month and day), a date alert indicator (!) and the current date flash for 24 hours after the alert date arrives in the Timekeeping Mode. You can set up to five different date alerts.

Alert date	Current date
(Month – Day)	(Month – Day)

l	l	l l	l	l	l	l
							l
l								l
l	l
		l l	l	l	l	l

Minutes Seconds1/100 second

The stopwatch lets you measure elapsed time, split times, and two finishes.•The display range of the stopwatch is 59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.

•Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement.

•The stopwatch measurement operation continues even if you exit the Stopwatch Mode.

•All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C.

Alert name	Date alert
	indicator
Date Alert Mode Screen	Timekeeping Mode Screen

To measure times with the stopwatch

Elapsed Time

To set the alert date

l l l ll
l		l
l		l
l
l		l
l	l
l l l

(Current date does not flash if digital time is displayed on the Timekeeping Mode screen.)

1.Use Cto enter the Date Alert Mode.

2.Use Dto scroll through the alert screens until the one whose date you want to set is displayed.

DA1 DA2 DA3DA5 DA4

D	➤D	➤D	➤D	➤A
Start	Stop	Re-start	Stop	Clear
Split Time
D	➤A	➤A	➤D	➤A
Start	Split	Split release	Stop	Clear
Two Finishes
D	➤A	➤D	➤A	➤A
Start	Split	Stop	Split release	Clear
	First runner	Second runner	Display time of
	finishes.	finishes.	second runner.

3.After you select an alert, hold down Auntil the month setting of the alert date

starts to flash, which indicates the setting screen.• This operation automatically turns on the alert.4.Press C to move the flashing between the month and day settings.5.While the month or day setting is flashing, use D(+) and B(–) to change it.6.Press A to exit the setting screen.

Display time of

first runner.

3