Casio 3793 Telememo, World Time, Alarms, World Time, Alarm Operation

New Data Screen

Operation Guide 3793

Telememo

World Time

Remaining memory

Name

Record number

Number

Telememo lets you store up to 30 records, each containing name and telephone number data. Records are automatically sorted based on the characters of the name. You can recall records by scrolling through them on the display.

•A Telememo Mode record has a name field and a number field.

•See “Character List” for details on how the watch sorts records.

•All of the operations in this section are performed in the Telememo Mode, which you enter by pressing B.

World Time digitally displays the current time in 30 cities

City code (29 time zones) around the world.

• All of the operations in this section are performed in the World Time Mode, which you enter by pressing B.

	World Time
	The time settings of the Timekeeping Mode and the World
	Time Mode are independent of each other, so you must
	make separate settings for each. This watch is preset with
Current time for the	a number of city codes, each of which represents the time
selected city code	zone where that city is located.

•Whenever you change the time setting for any city in the World Time Mode, the settings of all other cities are changed accordingly.

•If your location is not included in the preset city codes, select the preset city code that is in the same time zone as your location.

•For full information on city codes, see the “City Code Table”.

To create a new Telememo record

1. In the Telememo Mode, press C and Dat the same time to display the new data screen.

• The new data screen shows ___, which indicates that there is no text in the name field.

•If the new data screen does not appear, it means that memory is full. To store another record, you will first

have to delete some of the records stored in memory. 2. Hold down Auntil the flashing cursor ( _) appears in

the name field of the display, which indicates the setting screen.

3. Use D and C to change the character at the cursor position in the name field. The character changes in the following sequence.

Press .
	(space)	to	to	to
Press .

•You can input spaces, alpha characters, symbols, and numbers in a name. For details, see the “Character List”.

4.When the character you want is at the cursor position, press Bto move the cursor to the right.

5.Repeat steps 3 and 4 until the name is complete.

•You can input up to eight characters for the name.

6.After you input the name, press B as many times as

necessary to move the cursor to the number field.

•You tell when you are in the name field because of

the long cursor ( _). The number field has a short cursor ( _).

•The name field has spaces for eight characters, so you must press Bto move the past the 8th character in order to get to the number field.

•The number field has spaces for 16 digits. Pressing B until the cursor moves past the 16th digit causes it to jump back to the first character of the name field.

7.Use D and C to change the character at the cursor position in the number field. The character changes in the following sequence.

Press .

(space)to

Press .

To set the World Time

1. In the World Time Mode, press Dto scroll through city codes.

2. Hold down A until the DST On/Off setting of the world time starts to flash, which indicates the setting screen.

3. Press B to move the flashing in the sequence shown below to select the other settings.

DST Hour Minutes

4.While a setting is flashing, use Dand Cto change it.

•Pressing Dand Cat the same time while any World Time setting is flashing causes the displayed time to change to the same setting as the current Timekeeping Mode time.

•While DST On/Off setting is selected (flashing), press Dto toggle between Daylight Saving Time (ON) and Standard Time (OFF).

•While the hour or minutes setting is selected (flashing), use D(+) and C (–) to change it.

5.Press Ato exit the setting screen.

To view the time in another city code

In the World Time Mode, press Dto scroll through city codes.

To toggle a city code time between Standard Time and Daylight Saving Time

1.In the World Time Mode, use Dto display the city code whose Standard Time/Daylight Saving Time setting you

		want to change.
		2. Hold down A until the DST On/Off setting of the world
		time starts to flash, which indicates the setting screen.
		3. Press D to toggle between Daylight Saving Time (ON
		displayed) and Standard Time (OFF displayed).
		4. Press Ato exit the setting screen.
DST	indicator	• The DST indicator appears on the World Time Mode
		display to indicate that Daylight Saving Time is turned
		on.
		• The above operation toggles all World Time city codes
		between Daylight Saving Time and Standard Time. Note
		that you cannot make settings for individual city codes.

Alarms

8.When the character you want is at the cursor position, press Bto move the cursor to the right.

9.Repeat steps 7 and 8 until you complete number input.

•You can input up to 16 digits for the number.

10.Press A to store your data and return to the Telememo record screen (without

the cursor).

•After you press Ato store data, the name flashes for about one second to indicate that records are being sorted.

•Note that a record must have something input in the name field, otherwise you will not be able to store it.

To recall Telememo records

In the Telememo Mode, press D (+) to scroll through Telememo records on the display.

•Only name data appears when you scroll through Telememo records.

•Press Ato toggle the screen between the name and number fields.

Name Number

Press .

• The name and number scroll from right to left on the display. A separator ( <) is

inserted between the last character and first character of the data.

Alarm time (Hour : Minutes)

AM indicator

To set an alarm time

You can set three independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms is a snooze alarm, while the other two are one-time alarms.

You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.

•There are four screens in the Alarm Mode. Two are for one-time alarms (indicated by numbers AL1and AL2), one is for a snooze alarm (indicated by SNZ), and one is for the Hourly Time Signal (indicated by

SIG).

•All of the operations in this section are performed in the Alarm Mode, which you enter by pressing B.

1.In the Alarm Mode, use Dto scroll through the alarm screens until the one whose time you want to set is displayed.

•To set a one-time alarm, display one of the screens indicated by an alarm number AL1or AL2. To set the snooze alarm, display the screen indicated by SNZ.

•The snooze alarm repeats every five minutes.

• Pressing D while the last Telememo record is on the display causes the new data

screen to appear.

To edit a Telememo record

1.In the Telememo Mode, use Dto scroll through the records and display the one you want to edit.

2.Hold down Auntil the flashing cursor appears on the display.

3.Use B to move the flashing to the character you want to change.

4.Use C and D to change the character.

•For details on inputting characters, see “To create a new Telememo record” (step 3 for name input and 7 for number input).

5.After making the changes that you want, press Ato store them and return to the Telememo record screen.

To delete a Telememo record

1.In the Telememo Mode, use Dto scroll through the records and display the one you want to delete.

2.Hold down Auntil the flashing cursor appears on the display.

3.Press Cand Dat the same time to delete the record.

•CLR appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input.

4.Input data or press Ato return to the Telememo record screen.

2.After you select an alarm, hold down Auntil the hour setting of the alarm time starts to flash, which indicates the setting screen.

•This operation automatically turns on the alarm.

3.Press Bto move the flashing between the hour and minute settings.

4.While a setting is flashing, use D(+) and C(–) to change it.

•When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator).

5.Press Ato exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off .

•Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode digital time.

•To stop the alarm tone after it starts to sound, press any button.

•Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen

2