Operation Guide 4734 4735
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to read this manual carefully.
Warning!
•The measurement functions built into this watch are not intended for use in taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonably accurate representations only.
•When hunting or fishing, always take proper precautions to ensure your own personal safety and the personal safety of others around you.
•The hunting/fishing level indicator and moon phase indicator produced by this watch are all based on calculations that use the watch’s current time, date, and Home Site settings. Because of this, you should make sure that the current date and time, and your Home Site data are all correct before using the indicators.
•See the “Timekeeping” section of this manual for information about setting the current time and date, and about specifying your Home Site.
•Note that the hunting/fishing level indicator and moon phase indicator are all based on calculated values. They are provided only for reference purposes.
•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this watch.
General Guide
•Press Cto change from mode to mode.
•In any mode (except when a setting screen is on the display), press Bto illuminate
the display. | Hunting/Fishing Mode |
| |
| Press C. |
Timekeeping Mode | ▲ |
|
About This Manual
(Light)
or
Module 4734
Module 4735
Temperature Data
Recall Mode
▲
•Depending on the model of your watch, display text appears either as dark figures on a light background (Module 4734), or light figures on a dark background (Module 4735). All sample displays in this manual are shown using dark figures on a light background.
•Depending on the model of your watch, the hunting/fishing
level indicator will show either animal tracks (
) or fish (
). All of the illustrations in this manual show animal tracks.
•Button operations are indicated using the letters shown in the illustration.
•For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch.
•Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.
Stopwatch Mode
▲
| Hand Setting Mode |
▲ | ▲ |
World Time Mode | Alarm Mode | ▲ |
Countdown Timer | ||
|
| Mode |
▲ |
| ▲ |
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different.
•In the Timekeeping Mode, press A to toggle between the thermometer screen and the temperature tendency screen.
| Thermometer Screen | Temperature Tendency | |
| Screen | ||
P M |
| Temperature Day of week – | |
|
| ||
| Day | Temperature | |
indicator | |||
Press A. | tendency | |
graph | ||
|
| ▲ | ▲ |
Hour : | Hunting/Fishing | |
Minutes | level indicator |
|
Seconds | Moon phase | |
indicator | ||
|
•The hunting/fishing level indicator indicates the times when game or fish can be expected to be feeding. For more information, see “Hunting/Fishing Mode”.
•The Moon phase indicator shows the current Moon phase in accordance with the current date as kept in the Timekeeping Mode.
•See “Thermometer” for details about the thermometer screen and temperature tendency graph.
Important!
•Be sure to configure the current time and date, and your Home Site data (data for the site where you use the watch) correctly before using the functions of this watch. See “Home Site Data” for more information.
Setting the Digital Time and Date
This watch is preset with UTC differential values that represent each time zone around the globe. Before setting the digital time, be sure to first set the UTC differential for your Home Site, which is the location where you normally will be using the watch.
•Note that World Time Mode times are all displayed based on the time and date settings you configure in the Timekeeping Mode.
To set the digital time and date
|
|
|
|
| 1. In the Timekeeping Mode, hold down Auntil the | ||||
|
|
|
|
| seconds start to flash, which indicates the setting | ||||
|
|
|
|
| screen. |
|
|
| |
|
|
|
|
| • Be sure to configure the correct UTC differential for | ||||
| l | l l |
|
| your Home Site before configuring any other | ||||
l | l |
| Timekeeping Mode settings. |
| |||||
| l |
|
| ||||||
l |
|
| l |
|
| ||||
l |
|
| • See the “UTC Differential/City Code List” for | ||||||
l |
| l |
| ||||||
| l l l |
|
| information about the UTC differential settings that are | |||||
|
|
|
|
| |||||
Seconds |
| supported. |
|
|
| ||||
| 2. Press Cto move the flashing in the sequence shown | ||||||||
|
|
|
|
| |||||
|
|
|
|
| below to select the setting you want. |
| |||
Seconds | DST | UTC | Hour | Minutes | |||||
Differential | Format | ||||||||
|
|
|
|
|
|
| |||
Temperature |
| Temperature Sensor | Day | Month | Year | ||||
|
| Unit |
| Calibration | |||||
|
|
|
|
|
| ||||
3.When the setting you want to change is flashing, use D and Bto change it as described below.
Screen: | To do this: | Do this: |
| Reset the seconds to 00 | Press D. |
|
|
|
| Toggle between Daylight Saving | Press D. |
| Time (ON) and Standard Time (OF) |
|
| Specify the UTC differential | Use D (+) and |
|
|
|
| Change the hour or minutes | Use D (+) and |
|
|
|
| Toggle between | Press D. |
|
| |
| Change the year, month, or day | Use D (+) and |
|
|
|
•The UTC differential setting range is
•For information about settings other than the time and date, see the following. Temperature Sensor Calibration: “Thermometer”
Temperature Unit: “To specify the temperature display unit”
4.Press Atwice to exit the setting screen.
•The
•The day of the week is displayed automatically in accordance with the date (year, month, and day) settings.
•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
•Any time the seconds setting is changed, the analog hands are adjusted accordingly.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
|
|
|
| 1.In the Timekeeping Mode, hold down Auntil the | |
DST indicator | seconds start to flash, which indicates the setting | ||||
|
|
|
| screen. | |
|
|
|
| 2. Press Conce and the DST setting screen appears. | |
|
|
|
| 3. Press Dto toggle between Daylight Saving Time (ON | |
l | l l ll | displayed) and Standard Time (OF displayed). | |||
| l | 4. Press Atwice to exit the setting screen. | |||
l |
| l | |||
l |
|
| l |
| |
l |
| • The DST indicator appears on the Timekeeping, | |||
| l l | l |
| ||
|
|
|
| ||
|
|
|
| Hunting/Fishing, Alarm, and Hand Setting Mode screens | |
On/Off status | to indicate that Daylight Saving Time is turned on. In the | ||||
case of the Hunting/Fishing Mode, the DST indicator | |||||
|
|
|
| ||
|
|
|
| appears on the hunting/fishing level screen only. | |
Home Site Data
Moon phase, the hunting/fishing level indicator, and Hunting/Fishing Mode data will not be displayed properly unless Home Site data (UTC differential and longitude) is configured correctly.
•The UTC differential is a value that indicates the time difference between a reference point in Greenwich, England and the time zone where a city is located.
•The letters UTC is the abbreviation for Coordinated Universal Time, which is the
rotation.
1