Operation Guide 4781

To recall e-DATA MEMORY records

In the e-DATA MEMORY Mode, use Dto cycle through e-DATA MEMORY records as shown below.

 

 

Record 1

 

 

Record 2

 

Remaining

 

 

 

 

 

 

memory

 

 

 

(

)

 

 

(

)

 

screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•The value on the remaining memory screen is the

percentage of memory that is still available. It does not indicate the number of records that can be stored.

Remaining Memory ScreenTo edit an e-DATA MEMORY record

1.In the e-DATA MEMORY Mode, use D to display the record you want to edit.

2.Hold down Auntil the flashing cursor appears on the display.

3.Use C to move the flashing to the character you want to change.

4.Use D (+) and B (–) to change the character.

5.After making the changes you want, press A to store them and return to the e-DATA MEMORY record screen.

To delete an e-DATA MEMORY record

1.In the e-DATA MEMORY Mode, use D to display the record you want to delete.

2.Hold down Auntil the flashing cursor appears on the display.

3.Press Band Dat the same time to delete the record.

•The message CLR appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input.

4.Input data or press Ato return to the remaining memory screen.

World Time

Alarm

Alarm time

When the daily alarm is turned on, the alarm tone sounds

when the alarm time is reached.

(Hour : Minutes)

You can also turn on an Hourly Time Signal (:00) that

 

 

 

 

causes the watch to beep twice every hour on the hour.

 

 

 

 

• You can configure alarm settings and Hourly Time

 

 

 

 

Signal settings in the Alarm Mode, which you enter by

 

 

 

 

pressing C.

 

 

 

 

 

To set an alarm time

1. In the Alarm Mode, hold down Auntil the hour setting

 

 

 

 

 

 

 

 

of the alarm time starts to flash, which indicates the

 

 

 

 

setting screen.

• This operation automatically turns on the alarm.

2.Press C to move the flashing between the hour and

minutes.

3.While a setting is flashing, use D (+) and B (–) to change it.

•With the 12-hour format, set the time correctly as a.m. (A indicator) or p.m. (P indicator).

4.Press Ato exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the watch is in.

•To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn the Daily Alarm and Hourly Time Signal on and off

In the Alarm Mode, press D to cycle through the on and off settings as shown below.

Day of week

City code

Current time in the zone of the selected city code (Hour : Minutes)

World Time shows the current time in 30 cities (27 time zones) around the world.

•All of the operations in this section are performed in the World Time Mode, which you enter by pressing C.

To view the time in another city code

In the World Time Mode, press D to scroll through city codes (time zones).

•For full information about city codes, see the “City Code Table”.

•If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City code settings and make the necessary changes.

Hourly Time Signal on indicator

Alarm on indicator

Alarm On Indicator/Hourly Time Signal On Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm Off

Alarm On

Alarm Off

Alarm On

 

Signal Off

Signal Off

Signal On

Signal On

 

 

 

 

 

 

 

 

 

 

 

 

 

•The alarm on indicator flashes while the alarm is sounding.

•The alarm on indicator and Hourly Time Signal on indicator are displayed in all modes.

Countdown Timer

To toggle a city code time between Standard Time and Daylight Saving Time

 

 

 

1. In the World Time Mode, use D to display the city code

 

 

 

(time zone) whose Standard Time/Daylight Saving Time

 

 

 

setting you want to change.

 

 

 

2. Hold down Afor about one second to toggle Daylight

 

 

 

Saving Time (DST displayed) and Standard Time (DST

 

 

 

not displayed).

 

 

 

• The DST indicator is on the display whenever you

DST indicator

display a city code for which Daylight Saving Time is

 

 

 

turned on.

•Note that the DST/Standard Time setting affects only the currently displayed city code. Other city codes are not affected.

Minutes

Hours Auto-repeat on indicator

Seconds

You can set the countdown timer within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero.

•You can also select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached.

•All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing

C.

City Temperature

To use the countdown timer

Press Dwhile in the Countdown Timer Mode to start the countdown timer.

Average high temperature

Month City code

Average low temperature

In the City Temperature Mode, the display shows the average high and low monthly temperatures in 30 cities around the globe.

Note

•Displayed temperatures are monthly averages. They do not ensure that the temperature on any particular date will fall within the indicated range.

•The average high temperature and low temperature values alternate on the display at two-second intervals.

•The screen that appears first is the one for the city and month that was on the display when you last exited the City Temperature Mode.

•All of the operations in this section are performed in the City Temperature Mode, which you enter by pressing

C.

•When the end of the countdown is reached and auto-repeat is turned off, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is automatically reset to its starting value after the alarm stops.

•When the end of the countdown is reached and auto-repeat is turned on, the alarm sounds, but the countdown starts again automatically whenever the countdown reaches zero.

•The countdown timer measurement operation continues even if you exit the Countdown Timer Mode.

•Press Dwhile a countdown operation is in progress to pause it. Press Dagain to resume the countdown.

•To completely stop a countdown operation, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value.

To set up the countdown timer

1. While the countdown start time is on the display in the Countdown Timer Mode, hold down A until the hour

To view city temperature data

1.In the City Temperature Mode, press Dto scroll through city codes (time zones).

2.Press A to display the data for the following month.

•For full information about city code, see the “City Code Table”.

To specify the temperature unit

While in the City Temperature Mode, press B and Dat the same time to toggle between Celsius (°C) and Fahrenheit (°F).

setting of the countdown start time starts to flash, which indicates the setting screen.

• If the countdown start time is not displayed, use the procedure “To use the countdown timer” to display it.

2.Press C to move the flashing in the sequence shown below to select other settings.

 

 

Hours

 

Minutes

 

 

Auto-repeat

 

 

 

 

 

3.

While a setting is flashing, use D and B to change it as described below.

 

 

 

 

 

 

 

 

 

Screen

To do this:

 

 

 

Do this:

 

 

 

 

 

 

 

 

 

0:00

Change the hours or minutes

 

 

 

Use D(+) and B(–).

 

 

 

 

 

 

 

 

OFF

Toggle auto-repeat on (ON) and off (OFF)

Press D.

 

 

 

 

 

 

 

 

• To specify a countdown start time of 24 hours, set 0:00.

 

 

4.

Press Ato exit the setting screen.

 

 

 

 

 

•The auto-repeat on indicator appears on the display while this function is turned on.

•Frequent use of auto-repeat and the alarm can run down battery power.

2