Operation Guide 5057

Upper right dial hand

Correct upper right dialhand home position

Day

Correct day home position

3.After confirming that the hands are in the correct home positions, press C. This will advance to the upper right dial hand home position adjustment.

•The upper right dial hand is in the correct home position if it points to “60”. If it doesn’t, use D to move the upper right dial hand to “60”.

4.After confirming that the upper right dial hand is in the correct home position, press C. This will advance to day home position adjustment.

•The day is in the correct home position if it shows “1”. If it doesn’t, use D(+) and B(–) to change the day to “1”.

•Pressing Chere will return the center dial hand and stopwatch second hand home position adjustment in step 1 of this procedure.

5.To return to the Timekeeping Mode, press A. Pressing Awill cause the watch to beep twice.

Reference

This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.

Auto Return Features

•If you leave the watch in the Alarm Mode or the home position adjustment mode for two or three minutes without performing any operation, it will return to the Timekeeping Mode automatically.

•If you do not perform any operation for about two or three minutes while a setting mode is selected, the watch will exit the setting mode automatically.

Scrolling

•The D and Bbuttons are used to change the hand setting in various setting modes. In most cases, holding down these buttons will start high-speed movement of the applicable hand(s) and day.

•High-speed movement of the hands and day will continue until you press any button, or until the moving hand(s) and day finish one complete cycle.

–One complete cycle for the hands is 24 hours.

–One complete cycle for the day is 31 days.

Specifications

Accuracy at normal temperature: ± 20 seconds a month

Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, 24-hour, day, day of the week

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Stopwatch: Measuring capacity: 59'59.95'' Measuring unit: 1/20 second

Measurements: Elapsed time, cumulative elapsed time, lap time

Other: Section distance input (Input range: 0.0 to 14.9); section average speed indication

Alarm: Daily alarm

Battery: One silver oxide battery (Type: SR927W)

Approximately 3 years on type SR927W (10 seconds of alarm operation per day)

3