Operation Guide 5090

Setting Calendar

#ALENDER DISPLAY

0RESSEAND 0RESSE 0RESSE HOLD 

$!9 -/.4( $!99/& 4(%(7%%+

0RESSETOTCOMPLETE

1. Press and hold Bin the calendar display to set calendar.

2. Each press of Cincrements the digit by one. Keep pressed to move at a high speed.

3. Press Bto shift flashing digit(s). The digit(s) to be changed will flash.

4. Press Bto complete.

••Pressing Aat any time above will exit the setting mode.

Specifications

Accuracy at normal temperature: ±30 seconds a monthDisplay capacity•Regular timekeeping mode

Analog: Hour, minute and second hands

Digital: Hour, minute, second, a.m. (A)/p.m. (P), month, day, day of the week

Time system: Changeover between 12/24-hour formats

Calendar system: Auto-calendar set at 28 days for February

•Stopwatch function

Measuring capacity: 59 minutes 59.99 seconds

Measuring unit: 1/100th of a second

Measuring modes: Elapsed time, split time, two finishes

•Daily alarm•Hourly time signal

Battery: One silver oxide battery (Type: SR927W)

Approximately 3 years on type SR927W (assuming alarm operation 20 sec./ day).

NOTE: THERE IS NO WAY unit components can be damaged or malfunction, due to misoperation of buttons. If confusing information appears on the display it means entry sequence was incorrect. Please read the manual and try again.

2