Operation Guide 5251 (OC)

Contents

E-2 About this manual

E-3 About the face

E-4 Crown Operations

E-6 Things to check before using the watch E-10 Charging the Watch

E-13 To use the charging guide

E-15 To recover from the sleep state

E-16 Radio Controlled Atomic Timekeeping

E-29 Adjusting the Home Positions E-32 Troubleshooting

E-36 Specifications

E-18 To get ready for a receive operation

E-20 To perform manual receive

E-21 To check the result of the latest receive operation

E-22 Configuring Time and Date Settings

E-23 To check the current location setting

E-23 To change the location setting

E-24 To set the time manually

E-26 To set the date manually

E-8

E-9

 

 

Charging the Watch

The face of the watch is a solar panel that generates power from light. The generated power charges a built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed to light.

Charging Guide

Important!

ξKeep the watch in an area normally exposed to bright light when storing it for long periods. This helps to ensure that power does not run down.

ξStoring the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause power to run down. Make sure that the watch is exposed to bright light whenever possible.

Whenever you are not wearing

 

 

 

When wearing the watch,

the watch, be sure to leave it in

 

 

 

makes sure that its face is

 

 

 

a location where it is exposed

 

 

 

not blocked from light by the

to light.

 

 

 

sleeve of your clothing.

ξ Best charging performance

 

 

 

ξ The watch may enter a sleep

is achieved by exposing

 

 

 

state (page E-14) if its face is

the watch to light that is as

 

 

 

blocked by your sleeve even

strong as possible.

 

 

 

only partially.

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot. Take care when handling the watch to avoid burn injury. The watch can become particularly hot when exposed to the following conditions for long periods.

ξOn the dashboard of a car parked in direct sunlight

ξToo close to an incandescent lamp

ξUnder direct sunlight

Power Levels



Movement indicates the current charge level.

You can get an idea of the watch’s power level by observing the movement of the x Second Hand in the regular timekeeping.

Level

Hand Movement

 

Charge

1

Normal.

 

 

 

 

Battery is charged.

 

x Second Hand moves in the following

 

2

pattern.

 

 

 

 

Battery is starting to go low.

 

1 second

 

1 second

 

2 seconds

 

 

 

 

 

 

x Second Hand moves at two-second

 

3

intervals.

 

 

 

 

Battery is low.

v Day Indicator changes to 1 (home

 

 

 

position).

 

 

 

 

 

 

 

 

 

 

 

4

x Second Hand stopped.

 

Battery is very low.

z Hour Hand and c Minute Hand

 

stopped at 12 o’clock.

 

 

E-10

E-11

ξWhen power drops to Level 4, all functions will be disabled but the watch will continue to keep time internally for about one week. If you recharge the battery sufficiently during this period, the analog hands will move automatically to the correct setting and regular timekeeping will resume. After one week, all settings (including timekeeping) will be cleared. Recharging the battery will reset all settings to their initial factory defaults.

Charging Guide

The charging guide causes the x Second Hand to perform movement that gives you a rough idea of whether the watch needs to be exposed to light in order to charge the battery.

To use the charging guide

1.Pull the crown out to the fi rst click. The x Second Hand will move to the currently selected location setting. Next, push the crown back in.

ξFor about one second, the x Second Hand will perform movement that indicates whether the watch’s battery requires charging.

 

Battery is charged.

Charge is very low.

Charge is low.

Consider leaving the watch in

Leave the watch in bright

light for charging.

light for long time until



charged.

Charge is low.

Leave the watch in light for charging.

ξ The current charging requirement is indicated whenever you push the crown back in from the first click.

ξ Failure to expose the watch to light when charging is required will cause the charge to be reduced even further.

ξ The charging guide is based on a calculated value (not the actual battery charge). Because of this, the battery charge may go low even if the charging guide indicates that immediate charging is not required. If this happens, expose the watch to light as soon as possible to charge the battery.

E-12

E-13

 

 

Charging Times

 

Daily Operation

 

 

 

Level Change *2

 

 

 

Exposure Level (Brightness)

 

 

Level 4

Level 3

Level 2

 

Level 1

*1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Outdoor sunlight (50,000 lux)

8 minutes

 

 

 

2 hours

 

25 hours

Window sunlight (10,000 lux)

30 minutes

 

 

 

4 hours

 

93 hours

 

 

 

 

 

 

 

 

 

 

Window sunlight on cloudy day (5,000 lux)

48 minutes

 

 

 

6 hours

151 hours

 

 

 

 

 

 

 

 

 

 

Indoor fluorescent lighting (500 lux)

8 hours

 

 

 

59 hours

 

– – –

*1 Approximate exposure each day to generate power for normal daily operation.

*2 Approximate exposure to take power up one level.

ξThe above times are for reference only. Actual times depend on lighting conditions.

ξFor details about the operating time and daily operating conditions, see the “Power Supply” section of the Specifications (page E-36).

How Power Saving works

The watch will enter the sleep state if it is left in a dark location for about one week.

ξIn the sleep state:

All hands stop at 12 o’clock.

Auto Receive is disabled.

Internal timekeeping continues to operate normally.

ξThe watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep state.

To recover from the sleep state

Move the watch to a well-lit area, press the Abutton, or pull out the crown to the fi rst click.

ξIt can take up to eight minutes for the watch to resume normal operation after recovering from the sleep state. Do not perform any button operations during that time.

Power Saving

A Power Saving feature causes the watch to enter a sleep state automatically whenever it is left for a certain period in an area where it is dark.

E-14

E-15