Casio 5269 Conﬁguring Current Time and Date Settings, Hand Home Position Adjustment, Taking Direction Readings, 12H, 24H, SEC, Note, 0:00, ADJUST, ADJUST, ADJUST, ADJUST

Operation Guide 5269

Conﬁguring Latitude and Longitude Settings for Your Current Location

You can ensure correct display of sunrise and sunset time settings, and of moon ages by conﬁguring latitude and longitude settings for your current location.

To select a Home City by conﬁguring latitude and longitude settings

1.In the Timekeeping Mode, hold down A for at least two

seconds until ADJUST appears on the digital display. This is the setting mode. Release A after ADJUST

appears.

• Your current Home City data will appear on the digital display with an arrow ( ) ﬂashing to the left.

2.Press A to display the latitude setting screen with the current latitude setting ﬂashing.

3.Use D (+) and B (–) to change the ﬂashing value in 0.1° increments.

•Holding down D or B while the latitude or longitude setting screen is displayed will scroll the value to the left of the decimal point (the value to the right does not change) at high speed.

S62.0°S 61.9° S 0.1°N 0°N 0.1° N 61.9°N 62.0°

4.When the latitude is the value you want, press C to display the longitude setting screen with the current longitude setting ﬂashing.

5.Use D (+) and B (–) to change the ﬂashing value in 0.1° increments.

W 179.9°W 179.8°W 0.1°E 0°E 0.1°E 179.9°E 180°

6.When the settings are the way you want, press A to return to the Timekeeping Mode.

E-20	E-21

Conﬁguring Current Time and Date Settings

You can use the procedure below to adjust the current time and date settings if they are not correct.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the analog time does not indicate the digital time, check the home positions of the hands and make adjustments if necessary (page E-26).

To change the current time and date settings

1.In the Timekeeping Mode, hold down A for at least two seconds until ADJUST appears on the digital display.

This is the setting mode. Release A after ADJUST appears.

• The name of the city currently selected as your Home City will appear on the digital display with an arrow

( ) ﬂashing to the left.

City name

E-22

2.Use D and B to select the city data you want.

•Select your Home City data before changing any other setting.

•For full information on city data, see the “City Data Table” at the back of this manual.

3.Press C to move the ﬂashing in the sequence shown below to select the other settings.

City data DST 12/24-Hour Format Seconds Hour Minute Year

Date Display Format Illumination Duration Button Operation Tone On/Off Day Month

•The following steps explain how to conﬁgure timekeeping settings only.

4.When the timekeeping setting you want to change is ﬂashing, use B and/or D to change it as described below.

E-23

Screen	To do this:	Do this:
	Change the city name	Use D (East) and
	Change the city name	B (West).
		B (West).
	Toggle between Daylight Saving Time	Press D.
	(DST ON) and Standard Time (DST OFF).	Press D.
	(DST ON) and Standard Time (DST OFF).
	Toggle between 12-hour (12H) and 24-hour	Press D.
	(24H) timekeeping.	Press D.
	(24H) timekeeping.
	Reset the seconds to 00	Press D.

	Change the hour or minute	Use D (+) and
		Use D (+) and
	Change the year, month, or day	B (–).
	Change the year, month, or day

	Select the date display format (DMY, YMD,	Press D.
	MDY)	Press D.
	MDY)

Note

•For information about selecting a Home City and conﬁguring the DST setting, see “Conﬁguring Home City Settings” (page E-17).

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

•Changing your Home City setting will initialize the latitude and longitude settings to the location of the Home City.

5.When the settings are the way you want, press A twice to return to the Timekeeping Mode.

E-24	E-25

Hand Home Position Adjustment

The hour, minute, and second hands of this watch can be put out of position by strong magnetism or strong impact. When this happens, you can use the procedure below to adjust the hand positions.

To adjust home positions
Second hand	1. In the Timekeeping Mode, hold down A for at least
Second hand	four seconds until HAND SET appears on the digital
	display. This is the setting mode. Release A after
	HAND SET appears.
	• This will cause SEC 00 to ﬂash on the digital
	display, indicating the second hand adjustment
	mode.

Hour and minute hands

Correct hour and

minute hand positions

2.Check the position of the second hand.

•If the second hand is pointing to 12 o’clock, it is in the correct home position. If it isn’t, use D (forward) and B (back) to adjust the second hand position so it points to 12 o’clock.

•Holding down either button will cause the second hand to move at high speed.

3.Press C. This will cause 0:00 to ﬂash on the digital display, indicating the hour and minute adjustment mode.

4.Check the positions of the hour and minute hands.

•The hands are in the correct home positions if they are pointing to 12 o’clock. If they aren’t, use D (forward) and B (back) to adjust their positions.

•Holding down either button will cause the hour and minute hands to move at high speed.

E-26	E-27

5.Press A to exit the setting screen.

•This will cause the hour and minute hands to move to the current Timekeeping Mode time.

Taking Direction Readings

The watch has a magnetic sensor that makes it possible to take digital compass readings. You can use the digital compass to ﬁnd the direction to a speciﬁc objective and to determine your current position.

•See “Magnetic North and True North” (page E-40) for information about the two types of north. For information about maximizing digital compass accuracy, see “Calibrating Direction Readings” (page E-34) and “Digital Compass Precautions” (page E-40).

E-28

E-29