Operation Guide 5269

E-70 Troubleshooting

Mode Reference Guide

 

 

E-75 Specifications

Your watch has 9 “modes”. The mode you should select depends on what you want to do.

 

 

To do this:Enter this mode:See:

 

• View the current time and date in the Home City

 

 

 

• Configure Home City and daylight saving time (DST) settings

Timekeeping Mode

E-16

 

• Configure current location latitude and longitude settings

 

 

 

• Configure time and date settings

 

 

 

• Determine your current bearing or the direction from your current

Digital Compass

 

 

location to a destination as a direction indicator and angle value

E-29

 

Mode

 

• Determine your current location using the watch and a map

 

 

Determine the temperature at your current location

Thermometer Mode

E-43

 

View the sunrise and sunset times for a specific date

Sunrise/Sunset Mode

E-49

 

Determine a Moon age value

Moon Age Mode

E-52

 

Set an alarm time

Alarm Mode

E-54

 

Use the stopwatch to measure elapsed time

Stopwatch Mode

E-58

 

Use the countdown timer

Countdown Timer Mode

E-60

 

View the current time in one of 48 cities (31 time zones) around the globe

World Time Mode

E-63

E-10

 

 

E-11

 

 

 

 

Selecting a Mode

•The illustration below shows which buttons you need to press to navigate between modes.

•To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

•In any mode, press L to illuminate the display.

Alarm Mode

Moon Age Mode
Stopwatch ModeCountdown Timer Mode
Sunrise/Sunset ModeTimekeeping Mode

 

Digital Compass Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

World Time ModeThermometer Mode

E-12

E-13

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

•If you do not perform any operation for a certain amount of time in certain modes as shown in the table below, the watch will automatically return to the Timekeeping Mode.

ModeNo operation time

Digital Compass, Thermometer

1 to 2 minutes

Sunrise/Sunset, Moon Age, Alarm

2 to 3 minutes

•If you leave a setting screen (one with flashing digits) on the digital display for two or three minutes without performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or World Time Mode, the data you were viewing when you last exited the mode will appear first.

Scrolling

The B and D buttons are used on the setting screen to scroll through available settings on the digital display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-14

E-15

 

 

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

•Each press of A in the Timekeeping Mode toggles the digital display between the current date and the current time.

•You can select one of the two following Date Screen display formats: SUN 6.30 or SUN 30.6. For information about how to select the format, see “Date Display Format” under “To change the current time and date settings” (page E-22).

Date screen

Regular timekeeping screen

Day of week

Month Day

Hour : Minutes Seconds

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down A for at least two

City Name seconds until ADJUST appears on the digital display. This is the setting mode. Release A after ADJUST appears.

• The city name of the currently selected Home City data will appear on the digital display with an arrow ( ) flashing to the left.

•The watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes.

•For details about city data, see the “City Data Table” at the back of this manual.

E-16

E-17

 

 

2. Press D (East) and B (West) to scroll through city names until the one you want

To change the Daylight Saving Time (summer time) setting

 

to use as your Home City data is displayed.

3.

Press C to display the DST setting screen.

4.

Press D to toggle between Daylight Saving Time (DST ON) and Standard Time

 

(DST OFF).

 

5. When the setting is the way you want, press A twice to

return to the Timekeeping Mode.

•The DST indicator appears to indicate that Daylight

 

Saving Time is turned on.

 

Note

 

• After you specify city data, the watch will use UTC*

Setting

offsets to calculate the current time for other time

zones based on the current time in your Home City.

DST indicator

* Coordinated Universal Time, the world-wide

 

scientific standard of timekeeping.

 

The reference point for UTC is Greenwich, England.

Setting

DST indicator

1.In the Timekeeping Mode, hold down A for at least two

seconds until ADJUST appears on the digital display. Release A after ADJUST appears.

•The name of the city currently selected as your Home City will appear on the digital display with an arrow ( ) flashing to the left.

2.Press C to display the DST setting screen.

3.Press D to toggle between Daylight Saving Time (DST ON) and Standard Time (DST OFF).

4.When the setting is the way you want, press A twice to return to the Timekeeping Mode.

•The DST indicator appears to indicate that Daylight Saving Time is turned on.

E-18

E-19