Operation Guide 5369 (MTG)

To specify the countdown start time

1. In the Countdown Timer Mode, pull out the crown to the fi rst click.

ξIf you do not perform any operation with the crown for about two minutes

 

 

 

 

 

 

 

 

 

 

after pulling it out, crown operations will become disabled and the watch

 

 

 

 

 

 

 

 

 

 

hands will no longer move when you rotate the crown. If this happens,

 

 

 

 

 

 

 

 

 

 

push the crown back in and then pull it out again.

 

 

 

 

 

 

 

 

 

2. Rotate the crown to set the countdown start time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ξ You can use high-speed movement (page E-3) when performing the above

 

 

 

 

 



 

 

 

step.

 

 

 

 

 

 

 

 

 

 

 

ξ To set a start time of 60 minutes, position the n Small Hour Hand at

 

 

 

 

 

 

 

 

 

 

12 o’clock and the m Small Hour Hand (24-hour)at 6 o’clock. To set

 

 

 

 

 

 

 

 

 

 

a start time of 120 minutes, position the n Small Hour Hand and the

 

 

 

 

 

 

 

 

 

 

m Small Hour Hand (24-hour) at 12 o’clock.

 

 

 

 

 

 

 

 

 

3. Push the crown back in.

 

To perform a countdown timer operation

 

A

 

 

 

 

 

 

 

 

 

A

 

B

 

 

 

 

 

 

 

 

 

 

Start

 

 

Stop

Reset

ξPressing Bwhile the Countdown Timer is stopped resets the displayed time to the start time specified by you.

ξPressing Bwill not perform a reset while the hands are moving to the current timer time after you enter the Countdown Timer Mode.

E-40

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day when the current time kept by the watch reaches the preset alarm time. This is true even if the watch is not in the Alarm Mode.

 

 

 

 

Hand Functions

 

 

 

 

z Hour Hand

 

 

 

 

 

 

 

 

x Second Hand

 

 

 

 

c Minute Hand

 

 

 

 

 

 

 

 

v Hour Hand (24-hour)

 

 

 

 

 

 

 

 

 

 

 

 

b Small Minute Hand: Indicates the currently set alarm time minute.

 

 

 

 

 

 

 

 

 

 

 

 



 

 

n Small Hour Hand: Indicates the currently set alarm time hour.

 

 

m Small Hour Hand (24-hour): Indicates the currently set alarm time in 24-

 

 

 

 

 

 

 

 

hour format.

,Lower Dial Hand: Indicates the current alarm ON/OFF setting.

To enter the Alarm Mode

Refer to the Mode Reference Guide (page E-21).

ξEntering the Alarm Mode will cause the , Lower Dial Hand to move to ON or OFF.

E-42

5. Push the crown back in.

ξThe alarm always works based on the time kept by the watch.

To turn the alarm on or off

In the Alarm Mode, press Ato toggle the alarm between on and off. The , Lower Dial Hand will indicate the current ON/OFF setting.

To stop the alarm

Press any button.

E-44

Hand/Day Adjustment Steps

For full details, see the procedure from page E-47 to E-48.

Pull crown out to second click.

B(Until x Second Hand indicates 12 o’clock)

x Second Hand

C

C

c Minute Hand

 

. Day Indicator

 

 

 

b Small Minute Hand

 

 

 

z Hour Hand

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Adjustment

 

, Lower Dial Hand

 

 

n Small Hour Hand

 

 

 

 

C

Manual Adjustment

ξAfter completing adjustment, push the crown back in. Pushing the crown back in part way through

adjustment will return to the mode you started from with any adjustments you made in effect.

ξBefore starting a countdown timer operation, check to make sure that the countdown timer is not already operating (indicated by a moving b Small Minute Hand). If it is, press Ato stop it and then B to reset to the countdown start time.

ξPulling out the crown while a countdown operation is in progress will stop the ongoing operation so you can change the countdown start time setting.

To stop the alarm

Press any button.

E-41

To change the alarm time setting

1.In the Alarm Mode, pull out the crown to the fi rst click.

ξIf you do not perform any operation with the crown for about two minutes after pulling it out, crown operations will become disabled and the watch hands will no longer move when you rotate the crown. If this happens, push the crown back in and then pull it out again.

2.Rotate the crown to set the alarm time minute.

ξA high-speed movement feature (one full cycle maximum) is available in steps 2 and 4 when adjusting the hands. See “Crown Operations” (page E-3).

3.Press C.

ξThis causes the n Small Hour Hand to move.

4.Rotate the crown to set the alarm time hour.

ξMovement of the m Small Hour Hand (24-hour)is synchronized with movement of the n Small Hour Hand.

ξThe 12 o’clock position of the m Small Hour Hand (24-hour)indicates 24:00, while the 6 o’clock position indicates 12:00.

Note

ξEach press of the Cbutton toggles between the alarm time minute setting and the hour setting.

C

MinuteHour

ξSelecting the minute setting causes the b Small Minute Hand to move slightly. Selecting the hour setting causes the n Small Hour Hand to move slightly.

E-43

Adjusting the Hand and Day Home Positions

If the watch is exposed to strong magnetism or impact, it can cause its hands and/or the date to go out of alignment. This can result in incorrect date and/or time indication even though a time calibration signal is being received.

The watch automatically adjusts the x Second Hand, c Minute Hand, and z Hour Hand positions periodically. You also can trigger hand position adjustment manually, if you want.

ξThe v Hour Hand (24-hour)is adjusted simultaneously with the z Hour Hand.

If you notice that the b Small Minute Hand, n Small Hour Hand, m Small Hour Hand (24-hour), ,Lower Dial Hand, or . Day Indicator are not in the correct position, perform manual adjustment.

ξThe m Small Hour Hand (24-hour)is adjusted simultaneously with the n Small Hour Hand.

E-45

To adjust the hand and day home positions

Important!

ξYou do not need to perform the procedure in this section if the watch is indicating the time and/or day correctly.

1.In any mode, pull the crown out to the second click.

2.Hold down Buntil the watch beeps and the x Second Hand moves to 12 o’clock. This takes about fi ve seconds.

 

 

 

 

 

 

 

 

ξ Release Bwhen the x Second Hand gets to 12 o’clock. At this

 

 

 

 

 

 

 

 

time the watch will start automatic adjustment of the x Second

 

 

 

 

 

 

 

 

Hand, c Minute Hand, and z Hour Hand positions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ξ Adjustment is complete when the x Second Hand, c Minute



 

 

 

 

 

 

 

Hand, and z Hour Hand move to 12 o’clock.

3.Press C.

ξThis will cause the z Hour Hand and . Day Indicator to move.

ξWait until the . Day Indicator stops at a position halfway between 31 and 1.

ξIf the . Day Indicator is not halfway between 31 and 1, rotate the crown until it is.

ξRotating the crown causes the z Hour Hand to move in 12- hour increments, and the . Day Indicator to move in half-day increments.

E-46

E-47