Connections
Phones/Output Terminal
Before connecting headphones or other external equipment, be sure to first turn down the volume settings of the keyboard and the connected equipment. You can then adjust volume to the desired level after connections are complete.
Rear Panel
When connected to a musical instrument amplifier, set the volume of the keyboard to a relatively low level and make output volume adjustments using the amplifier’s controls.
Connection Example
Connecting Headphones (Figure 1)
Connecting headphones cuts off output from the keyboard’s
Audio Equipment (Figure 2)
Connect the keyboard to an audio equipment using a commercially available connecting cord with a standard plug on one end and two PIN plugs on the other end. Note that the standard plug you connect to the keyboard must be a stereo plug, otherwise you will be able to output only one of stereo channels. In this configuration, you normally set the input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where the cord from the keyboard is connected. See the user documentation that comes with your audio equipment for full details.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord to connect the keyboard to a musical instrument amplifier.
Be sure to use a connecting cord that has a stereo standard plug on the end you connect to the keyboard, and a connector that provides dual channel (left and right) input to the amplifier to which you are connecting. The wrong type of connector at either end can cause one of the stereo channels to be lost.
Sustain/Assignable jack
Terminal
You can connect an optional sustain pedal
For details on how to select the pedal function you want, see “SUSTAIN/ASSIGNABLE JACK” on page
1SUSTAIN/ASSIGNABLE JACK Terminal
Sustain Pedal
With piano tones, depressing the pedal causes notes to linger, much like a piano’s damper pedal.
With organ tones, depressing the pedal causes notes to continue to sound until the pedal is released.
Sostenuto Pedal
As with the sustain pedal function described above, depressing the sostenuto pedal causes notes to be sustained.
This difference between a sostenuto pedal and sustain pedal is the timing. With a sostenuto pedal, you press the keys and then depress the pedal before you release the keys. Only the notes that are sounding when the pedal is depressed are sustained.
Soft Pedal
Depressing the pedal softens the sound of the notes being played.
|