Assembling the Stand

3. Use the two screws I to secure the top left and right edges of the back panel C to the brackets 5 of side panels A and B.

At location 6, slip the clip G onto to the screw I before installing the screw.

6. Place the piano onto the stand.

6

G

I

5

I

99

English

4. Next, secure the bottom of the back panel C with the six screws F.

At this time the screws on the bottom of the piano 8 should hook into the cutouts in the stand brackets 9.

BA

C

Bracket cutout

Back of piano

8

F

5. Adjust the height adjustment screw 7 to provide support so crosspiece D does not bow downwards when the pedals are pressed.

D7

IMPORTANT!

Pressing the pedals without adjusting height adjustment screw 7 can result in damage to crosspiece D. Always make sure you adjust height adjustment screw 7 before operating the pedals.

9

Stand side panel

7. Use the two butterfly bolts H to secure the piano to the stand.

H

IMPORTANT!

The butterfly bolts keep the piano from slipping off the stand. Never use the piano without the butterfly bolts installed.

E-29