Assembling the Stand
2. Slide back panel C into the grooves 4 of the side panels.
•After you slide back panel C into place, the positions of its screw holes should be aligned with those of crosspiece D.
C
4
3.Use the two screws I to secure the top left and right edges of the back panel C to the brackets 5 of side panels A and B.
•At location 6, slip the clip G onto to the screw I before installing the screw.
5. Adjust the height adjustment screw 7 to provide support so crosspiece D does not bow downwards when the pedals are pressed.
D7
IMPORTANT!
•Pressing the pedals without adjusting height adjustment screw 7 can result in damage to crosspiece D. Always make sure you adjust height adjustment screw 7 before operating the pedals.
6. Place the piano onto the stand.
6
G
I
5
I
9
9 
4. Next, secure the bottom of the back panel C with the six screws F.
BA
C
F
•At this time the screws on the bottom of the piano 8 should hook into the cutouts in the stand brackets 9.
Back of piano
8
Bracket cutout
9
Stand side panel