Getting Ready 
4. Use the two screws I to secure the top left and right edges of the back panel C to the brackets 5 of side panels A and B.
•At location 6, slip the clip G onto to the screw I before installing the screw.
7. Place the piano onto the stand.
IMPORTANT!
• In order to ensure you do not get your fingers |
pinched between the piano and the stand, grasp the |
piano on its sides (not its ends) at the locations |
English
B
6 
5
G 
A
marked with stars () in the illustration. |
I
I
5.Next, secure the bottom of the back panel C with the six F screws.
•Place one of the clips G onto the leftmost screw F as shown in the illustration below.
B 
A
C
G 
F
6. Adjust the height adjustment screw 7 to provide support so crosspiece D does not bow downwards when the pedals are pressed.
D7
IMPORTANT!
•Pressing the pedals without adjusting height adjustment screw 7 can result in damage to crosspiece D. Always make sure you adjust height adjustment screw 7 before operating the pedals.
At least 10cm
At least 10cm
9
•At this time the screws on the bottom of the piano 8 should hook into the cutouts in the stand brackets 9.
Back of piano
Bracket cutout
9 | Stand side panel |
|
8