Casio Parameter List, 22Using the Parameter List, 23System Parameters, 23.1System Information Parameter

Part V

Parameter List

This section explains the parameters that actually can be transferred by the Instrument.

22Using the Parameter List

•Parameter field

Shows the parameter name.

•ID field

Shows the parameter ID as a hexadecimal number.

•R/W field

Shows "R" to indicate that an IPR (Individual Parameter Request) read operation (Read) is possible or "W" to indicate that an IPS (Individual Parameter Send) write operation is possible.

•Block field

Shows the bit field allocation of the block number. The bit field position is shown as a decimal format number.

•Size field

Shows the parameter bit width as a decimal format value.

•Array field

Shows the parameter array size as a hexadecimal value.

•Min-Def-Max field

Shows the minimum value, default value, and maximum value for parameter acquisition as a hexadecimal value.

•Description field

Explains the meaning of parameter values. Unless otherwise specified, setting values are all indicated in decimal format.

23System Parameters

These parameters make it possible for an external device to check the status of the Instrument and for an external device to command some operation of the Instrument.

23.1System Information Parameter

This parameter is a container for system information.

Parameter	ID	R/W	Block	Size	Array	Min-Def-Max	Description
Model Name	0000	R	000000	7	08	00-20-7F	Ascii Character
							CTK-4000 ..."CTK-4000"
							CTK-5000 ..."CTK-5000"
							LK-270 ....."LK-270 "
							LK-205 ....."LK-205 "
							WK-200 ....."WK-200 "
							WK-500 ....."WK-500 "
Program Revision	0001	R		7	08	00-20-7F	CDP-200R ..."CDP-200R"
			↑				Ascii Character
General Register	0002	R/W		8	01	00-00-FF	Ex. " 12345"
			↑				General-purpose register

for communication test

38