Casio CDP-220R Using Tracks to Record and Mix, Parts, To record to Tracks 1 through, • Track, deleted, contents, 2. Press bk, ■ About tracks, • Tracks 2 through

Recording Your Keyboard Play

8. Press bk twice to exit the recorder mode.
						Using Tracks to Record and Mix
			Disappears
						Parts
						You can divide a song according to various types of parts
						(instrument, left and right hand, etc.), and record each part to
						a specific track. You can mix up to six tracks (the original track
						plus five additional tracks) into a final song.
						■ About tracks
						Tracks are numbered from 1 to 6.
	• The flashing on the screen shown in step 3 becomes					• If you do not specify a track number when recording,
		faster when remaining recorder memory capacity				recording is performed to Track 1 automatically.
		becomes less than 100 notes.
	•	Total recorder memory capacity is approximately				In addition to what you play on the keyboard, the following
		12,000 notes. Recording will stop automatically when				information also is recorded.
		there is no more unused recorder memory remaining.				• Track 1
	•	Each press of bk cycles through the settings shown				Settings:
		below. You can listen to the recorded data as many				Tone number, rhythm number, tempo, reverb, chorus,
		times as you like by pressing 7 while in playback				chords, layer/split settings, Auto Harmonize/Arpeggiator
		standby.				setting
						Operations:
		Recorder Off		Playback	Record Standby	Pedal, pitch bend wheel, INTRO button, SYNCHRO/
				Standby		ENDING button, NORMAL/FILL-IN button, VARIATION/
						FILL-IN button

• Tracks 2 through 6

Tone number, pedal operation, pitch bend wheel operation

■To delete recorded data

After step 3 of the above procedure, do hold down bk	To record to Tracks 1 through 6
(without pressing any keyboard key) until the message	1. Record the first part to Track 1.
“Tr.Del?” appears on the display. Press [+] (YES) to delete the
data, or [–] (NO) to cancel the delete operation.	To record to Track 1, perform steps 1 through 4 under
	“Recording and Playing Back Keyboard Play” (page
	E-49).
• Turning off the Digital Piano while recording is in
		Lights
progress will cause any data in recorder memory to be
deleted.
• A new recording replaces (deletes) previously recorded
contents.

2. Press bk.

This will enter record standby.

Flashes

E-50