BEFORE USING THE CALCULATOR

FOR THE FIRST TIME...

Be sure to perform the following procedure to load batteries, reset the calculator, and adjust the contrast before trying to use the calculator for the first time.

1.Making sure that you do not accidently press the o key, attach the case to the

calculator and then turn the calculator over. Remove the back cover from the calculator by pulling with your finger at the point marked 1.

1

2. Load the four batteries that come with calculator.

•Make sure that the positive (+) and negative (–) ends of the batteries are facing correctly.

BACK UP

3.Remove the insulating sheet at the location marked “BACK UP” by pulling in the direction indicated by the arrow.

BACK UP

4.Replace the back cover, making sure that its tabs enter the holes marked 2 and turn the calculator front side up. The calculator should automatically turn on power and perform the memory reset operation.

2

i