Loading Program Library Programs

This calculator comes with a built-in Program Library that provides you with a collection of application programs. Unlike programs you input yourself, you must use the procedure described below to load Program Library programs into memory before you can run them.

•The Program Library is divided into sub-libraries.

•You cannot edit or reference the contents of a Program Library program.

To load the program “FACT” (JAPAN sub-library)

1. On the icon menu, select W.

2.Use the function keys to execute the LOAD command.

6(g)5(LOAD)

3.Use the fand ccursor keys and wto select first the sub-library and then the program.

(cc...) “JAPAN” w (cc...) “FACT” w

(The message “Load Complete!” appears for about one second. After that, the display returns to normal.)

•You can also jump to a specific location in the sub-library by inputting a letter. Inputting the letter “F” (aF), for example, causes the highlighting to jump to the first program name in the sub-library that starts with “F”.

•The message “Memory Full!” appears for about one second when there is not enough memory to store the program. Delete data you no longer need and try again.

1