Basic Operations

POWER/MODE

TONE

Number buttons

MAIN VOLUME

This section provides information on performing basic keyboard operations.

Playing the Keyboard

To play the keyboard

1Set the POWER/MODE switch to NORMAL.

2Use the MAIN VOLUME slider to lower the keyboard volume.

•It’s always a good idea to set the keyboard volume at a relatively low level before playing.

3Play something on the keyboard.

Selecting a Tone

This keyboard comes with 100 built-in tones. Use the following procedure to select the tone you want to use.

To select a tone1Find the tone you want to use in the TONE List and note its tone number.

•Not all of the available tones are shown on the tone list printed on the keyboard console. For a complete list, see the “Tone List” on page A-1.

2Press the TONE button.

3Use the number buttons to input the two digit tone number for the tone you want to select.

Example: To select “26”, input 2 and then 6 .

NOTE

•Always input both digits for the tone number, including a leading zero (if any). If you input one digit and stop, the display will automatically clear your input after a few seconds.

•You can also increment the displayed tone number by pressing [+] and decrement it by pressing [–].

Appears when TONE button is pressed

E-15