Part IV
Instrument-Specific System Exclusive Messages
19 Format
This section explains the format of the
19.1Message Classifications
Basically, the operation that corresponds to
The following operations can be performed from an external device using this parameter transfer message.
•Modification of an individual Instrument parameter
•Batch modification of a particular Instrument parameter set
•Import of an individual Instrument parameter value
•Batch import of a particular Instrument parameter set
In addition to parameters being used as device setting values, some parameters act as commands when received by the Instrument and as device status information when sent from the Instrument.
The following table shows the parameter category for each type of transfer.
Function Section | Parameter Category | Description |
System | System | Commands to the Instrument, Instrument stats |
| All | All user data |
|
|
|
Performance Controller | Song | User Song |
| Scale Memory | User Scale Memory |
| Sequence | Song Sequencer |
| Registration | Registration |
| Lesson Rec | Recorder |
| Rhythm | User Rhythm |
|
|
|
Sound Generator | Patch | Sound source common settings (system effects, mas- |
|
| ter settings, etc.), Instrument part settings (tone se- |
|
| lection, mixer channel setting, tuning, etc.) |
| Tone | Sampled sound (melody/drum) selected by the user |
| Drum | Sampled sound (drum) referenced from “Tone” cat- |
|
| egory parameters |
| Instrument | Individual instrument setting referenced from |
|
| “Drum” category parameters |
| Wave Parameter | Sampled sound Wave setting |
| Wave Data | Waveform actual data referenced from “Wave Pa- |
|
| rameter” category parameters |
21