TRANSPOSE/TUNE/MIDI

[+]/[–]

CONTROL CHANGE

This message adds effects such as vibrato and volume changes applied during keyboard play. CONTROL CHANGE data includes a control number (to identify the effect type) and a control value (to specify the on/off status and depth of the effect).

The following is a list of data that can be received using CONTROL CHANGE.

Effect

Control Number

VOLUME

7

PAN

10

HOLD1 *

64

MODULATION

1

*Pressing the foot pedal causes the sustain effect (HOLD1) to be sent (control number 64).

Changing MIDI Settings

This keyboard lets you change the settings of two MIDI parameters: TONE MAP and KEYBOARD CHANNEL.

To change MIDI parameters

1. Press the TRANSPOSE/TUNE/MIDI button either three or four times to select the parameter you want.

Press the TRANSPOSE/TUNE/MIDI button three times: KEY-

BOARD CHANNEL

Press the TRANSPOSE/TUNE/MIDI button four times: TONE MAP

Example: To select the TONE MAP parameter.

TONE

RHYTHM

SONG BANK

2. Use [+] and [–]to change the setting of the parame- ter.

Example: To change the TONE MAP parameter value to “G” (GM).

TONE

RHYTHM

SONG BANK

If you accidentally go past parameter you want, keep press- ing the TRANSPOSE/TUNE/MIDI button until parameter you want reappears on the display.

If you leave the parameter selection screen on the display for about five seconds without doing anything, the parame- ter selection screen is automatically cleared.

Parameters and Their Displays

KEYBOARD CHANNEL (Basic Channel) (Default: 01)

This parameter specifies the keyboard MIDI message send channel.

TONE

RHYTHM

SONG BANK

TONE MAP G/N (Default: N)

N:This settings specifies the normal tone map, which allows receipt of a program change value in the range of 0 to 99. Only tones that correspond to the 100 built-in tones of this keyboard can be played, and tone numbers outside this range are ignored.

TONE

RHYTHM

SONG BANK

G:This setting specifies the General MIDI tone map, which allows receipt of a program change value in the range of 0 to 127. Each of the 128 General MIDI tones is automatically assigned to one of the keyboard’s 100 built-in tones as shown on page A-1. Select this setting when you want to listen to General MIDI data from a computer or other external equipment.

TONE

RHYTHM

SONG BANK

NOTES

Playing a Song Bank tune causes all MIDI parameters to revert to their default settings. Also, MIDI messages cannot be received while the key- board is in the Song Bank Mode.

Song Bank data cannot be sent as MIDI data.

622A-E-033A

E-31

CTK451_E30_31

Page 31

01.7.26, 10:41 AM Adobe PageMaker 6.5J/PPC