Operation Guide
GENERAL GUIDE
1 SNOOZE/LIGHT button•Press this button to illuminate the display for about four seconds.
•Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Mode selector SNZ: Snooze alarm on ON: Alarm onOFF: Alarm off
3 UP (+) / DOWNUse these buttons to change the alarm time or the setting that is flashing on the display.
4 °C/°F buttonPress this button to toggle the temperature units between Celsius and Fahrenheit.
5 SET buttonUse this button when setting the current time.
6 CLEAR buttonPress this button to clear the currently displayed high/low temperature or humidity.
7 MAX/MIN TEMP. buttonPress this button to display the high and low temperature values.
8 RESET buttonPress this button to reset the clock after replacing its batteries.
9 MAX/MIN HUMIDITY buttonPress this button to display the high and low humidity values.
USING THE CLOCK
1.Press the SET button (5) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
Year Setting Screen | Month and Day Setting Screen | Time Setting Screen |
| ||||||
Timekeeping Screen | |||||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
2.While the screen you want is displayed, use the DOWN
| /° | SET | CL |
|
| |
| ° | F |
| EAR |
| |
| C |
|
|
|
| |
Press DOWN | DOWN | T E M P. HUMIDITY | UP | Press UP (+) to increase | ||
the flashing digits. | MAX/MIN MAX/MIN | (+) | the flashing digits. | |||
|
|
| RESET |
|
|
|
|
|
|
|
|
| |
Press DOWN | DOWN |
|
|
| UP (+) | Press UP (+) to increase |
the flashing digits. |
|
|
| the flashing digits. | ||
|
|
|
|
| ||
|
|
|
|
|
|
|
•Holding down UP (+) or DOWN
•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting.
•Pressing UP (+) or DOWN
•Each press of UP (+) or DOWN
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation.
USING THE ALARM
The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature.
Setting the Alarm Time
Use the DOWN
Pressing the DOWN
| /° | SET | CLEAR |
| |||
| ° |
|
| ||||
| C | F |
|
|
|
| |
Press to change the | DOWN |
| T E M P. HUMIDITY | UP | Press to change the | ||
alarm time setting |
| MAX/MIN MAX/MIN | (+) | alarm time setting (+) | |||
|
|
|
| RESET |
|
|
|
|
|
|
|
|
|
| |
Press to change the | DOWN |
|
|
|
| UP (+) | Press to change the |
alarm time setting |
|
|
|
| alarm time setting (+) | ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
•Holding down UP (+) or DOWN
Turning the Alarm On and Off
Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature.
Alarm Mode selector | Description |
| SNZ | The alarm sounds at the preset time for one minute, and seven more times every five |
| minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT |
| button (1), the alarm sounds again five minutes later. |
| • The indicator flashes on the display to indicate that the snooze feature is |
| activated. |
ON
The alarm sounds at the preset time for one minute.
| OFF | The alarm does not sound. |
•The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON or SNZ.
•The light also turns on for the first four seconds that the alarm sounds.
•The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
•When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes.
•To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
2