Casio DQD-105 USING THE ALARM, USING THE LIGHT, AUTO LIGHT, TO TURN AUTO LIGHT ON AND OFF, Setting the Alarm Time, Turning the Alarm On and Off, Stopping the Alarm

Operation Guide DQD-105

USING THE ALARM

The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm Mode selector (7) to select the snooze alarm feature.

Setting the Alarm Time

Use the Alarm Time Set buttons (4) to set the alarm time.

Pressing the Alarm Time Set buttons (4) causes the alarm time to appear in place of the time on the display.

Press to change the	Press to change the
alarm time setting (—).	alarm time setting (+).

•Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Mode selector (7) on the side of the clock to turn the alarm on and off, and to select the snooze feature.

Alarm Mode selector			Description

SNOOZE		The alarm sounds at the preset time for one minute, and seven
		more times every five minutes thereafter. Even if you stop the
(	)	alarm sound by pressing the SNOOZE/LIGHT button (1), the
		alarm operation is performed again five minutes later.

		• The indicator	flashes on the display to indicate that the
		snooze feature is activated.
ALM ON
(	)	The alarm sounds at the preset time for one minute.


ALM OFF		The alarm does not sound.

•The light also turns on for the first five seconds that the alarm sounds.

•The alarm sound changes over four levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Mode selector (7) to ALM OFF.

USING THE LIGHT

Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.

Important!

•Overuse of the light can shorten battery life.

AUTO LIGHT

•You can configure the Auto Light feature to illuminate the display of the clock at a specific time.

•The display will remain illuminate for six hours starting from the time you specify.

TO TURN AUTO LIGHT ON AND OFF


1.	While the Normal Timekeeping Screen is displayed, press the AUTO LIGHT button (3).
2.	Within about five seconds, press the Alarm Time Set buttons (4) to toggle Auto Light on or off.
3.	After the setting is the way you want, simply do not perform any key operation for about five seconds. The clock
	will return to the Normal Timekeeping Screen automatically.
* A NIGHT LIGHT indicator (		) remains on the clock display while Auto Light is on.

3 4

Normal Timekeeping Screen

AUTO LIGHT button (3)	Five seconds	NIGHT LIGHT indicator (	)

Auto Light Off		Auto Light On

Alarm Time Set buttons (4)

Alarm Time Set buttons (4)