USER’S GUIDE DQS-20

2.While the screen you want is on the display, use the Alarm Time Set buttons (3) to change the digits that are flashing.

Press to decrease

Press + to increase

the flashing digits.

the flashing digits.

Holding down + or changes the flashing digits at high speed.

You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting.

Pressing + or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

Each press of + or while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping.

3.After making the settings you want, use the SET button (4) to display the Normal Timekeeping Screen.

The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation.

USING THE ALARM

The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm Switch (6) to select the snooze alarm feature.

Setting the Alarm Time

Use the Alarm Time Set buttons (3) to set the alarm time.

Pressing an Alarm Time Set button (3) causes the alarm time to appear in place of the date on the display.

Press to change the alarm

Press to change the alarm

time setting (–).

time setting (+).

 

Alarm Time Set buttons

Holding down + or changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Switch (6) on the side of the clock to turn the alarm on and off, and to select the snooze feature.

Alarm Switch SettingDescription

 

 

 

SNOOZE ON

The alarm sounds at the preset time for one

minute, and seven more times every five

( Zz

)

minutes thereafter. Even if you stop the alarm

 

 

sound by pressing the SNOOZE button (1),

 

 

the alarm operation is performed again five

 

 

minutes later.

 

 

The indicator Zz flashes on the display to

 

 

indicate that the snooze feature is activated.

ALARM ON

The alarm sounds at the preset time for one

(

)

minute.

 

 

 

OFF

 

The alarm does not sound.

 

 

 

The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNOOZE.

The backlight also turns on for the first four seconds that the alarm sounds.

The alarm sound changes over five levels as it sounds.

Stopping the Alarm

When alarm is sounding, press the SNOOZE button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes.

To turn off the snooze feature, slide the Alarm Switch (6) to OFF.

USING THE LIGHT

Pressing the LIGHT button (2) turns on the light and illuminates the display for easy reading in the dark.

Important!

Overuse of the light can shorten battery life.

BATTERY REPLACEMENT

Replace the battery whenever the display of the clock becomes dim and difficult to read.

Always have the battery replaced at your nearest dealer.

2