
Operation Guide 5263
4. Use D(+) and |
ξ Each press of either button will move the hands (z Hour Hand and c Minute |
Hand) one minute. |
ξ Holding down Dor Bwill start |
movement in the applicable direction. To stop |
press any button. |
ξ The b Lower Dial Hand and z Hour Hand move in sync with each other. |
ξ When setting the time, make sure that the b Lower Dial Hand indicates the |
proper a.m./p.m. hour. |
ξ If you want to change the date setting at this time, press Cand perform the |
procedure starting from step 3 under “To change the current date setting |
manually” (page |
5. After the time setting is the way you want, press Ato return to the Timekeeping |
Mode. |
ξ This will cause the x Second Hand to move automatically to 12 o’clock and |
resume movement from there. |
|
|
| 00 |
|
|
|
|
| |
90 |
|
|
| 10 | 20 | ||||
| |||||||||
80 |
|
|
|
|
|
|
|
| |
|
|
|
|
| |||||
|
| ||||||||
70 |
|
|
|
| 30 | ||||
|
|
60 40
50
Setting the year (tens digit)
1.In the Timekeeping Mode, keep Adepressed (for about fi ve seconds) as the x Second Hand goes through the following sequence.
ξMoves to YES (or Y for some models) or NO (N) to indicate the last signal reception result, then to READY (R), and then to the city code of the currently selected Home City.
2.Press Ctwice.
ξThe watch will beep and change to the year setting mode.
ξThe year can be set in the range of 2000 to 2099.
3.Use Dand Bto change the year setting.
ξEach press of Bwill move the v Left Dial Hand and change the tens digit of the year setting.
|
| 0 | 1 | 2 |
|
|
|
| |
9 |
|
|
| 3 |
8 | 7 | 6 | 5 | 4 |
|
|
Setting the year (ones digit)
Dec
Nov | Jan |
Oct | Feb |
Sep | Mar |
AugApr
| ξ Each press of Dwill move the x Second Hand and |
| change the ones digit of the year setting. |
4. | After the year setting is the way you want, press C. |
| ξ The watch will beep and change to the month setting |
| mode. |
5. | Use Dto move the x Second Hand to the month |
| setting you want. |
6. | After the month setting is the way you want, press C. |
| ξ The watch will beep and change to the day setting |
| mode. |
7.Use D(+) and
ξIf you want to change the time setting at this time, press Cand then perform the procedure starting from step 3 under “To change the current time setting manually” (page
8.After the settings are the way you want, press Ato return to the Timekeeping Mode.
ξThis will cause the x Second Hand to move automatically to 12 o’clock and resume movement from there.
ξThe day of the week indicated by the v Left Dial Hand changes automatically in accordance with the date (year, month, and day).
Jul May Jun
Setting the month
Note
ξThe watch’s
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x Second Hand: Indicates the stopwatch seconds count.
v Left Dial Hand: Indicates the stopwatch
count.
n Right Dial Hands: Indicate the stopwatch hours and
minutes.
power drops to Level 3. |
1.Use Cto move the v Left Dial Hand to ST.
2.Now you can perform either of following stopwatch operations.
To perform an elapsed time operationB |
|
|
|
|
| B |
| B |
| B |
|
|
|
| D | ||||
|
|
|
|
|
|
|
|
|
| ||||||||||
Start |
|
|
|
|
| Stop | (Restart) | (Stop) |
|
|
| Reset | |||||||
To pause at a split time |
|
|
|
|
|
|
|
|
|
| |||||||||
B |
|
| D |
|
| Normal stopwatch hand movement will |
| B |
|
| D | ||||||||
|
|
|
|
|
|
|
| ||||||||||||
Start |
| Split |
| resume automatically after five seconds. | Stop |
| Reset | ||||||||||||
|
|
|
|
|
|
|
|
|
|
Note
ξ The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.95 |
seconds. |
ξ Dbutton operation (split, reset) is disabled while hands are moving at high speed |
following a reset operation and when transitioning from a split time back to normal |
Using the Countdown Timer
The countdown timer can be confi gured to start automatically at a preset time, and sound an alarm when the end of the countdown is reached.
elapsed timekeeping. |
ξ Once started, stopwatch timing continues until you press Bto stop it, even if you |
exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch |
limit defined above. |
ξ You can press Bto start an elapsed time operation immediately after entering the |
Stopwatch Mode, even if the watch’s hands are still moving to their initial Stopwatch |
Mode positions. Note, however, that if the stopwatch was not reset after the last |
elapsed time operation, timing will restart from where it was last stopped, and not |
from 0. |
ξ The v Left Dial Hand indicates the |
a stopwatch elapsed time operation. After that, the hand stops at 0. |
timing continues internally after the first 30 seconds, and the v Left Dial Hand will |
move to the current value whenever B(Stop) or D(Split) is pressed. |
Hand Functions
xSecond Hand:
Moves
vLeft Dial Hand: Points to TR. n Right Dial Hands:
Move
1.Use Cto move the v Left Dial Hand to TR.
2.After confi rming that the x Second Hand is stopped (which indicates there is no ongoing countdown timer operation), press D.
ξIf the x Second Hand is moving, press Bto stop it and then press D.
3.Use D(+) and
ξEach press of either button will move the n Right Dial Hands one minute.
ξHolding down Dor Awill start
ξThe maximum countdown start time setting is 24 hours. To set a countdown start time of 24 hours, move the n Right Dial Hands to 24.
To perform a countdown timer operation |
|
|
| |||||
B |
| B |
| B |
| B |
| D |
|
|
|
| |||||
Start | Stop | (Restart) | (Stop) | Reset |
ξBefore starting a countdown timer operation, check to make sure that the countdown timer is not already operating (indicated by a moving x Second Hand). If it is, press Bto stop it and then Dto reset to the countdown start time.
ξAn alarm sounds for 10 seconds when the end of the countdown is reached. This alarm will sound in all modes.
ξWhile a countdown operation is in progress, the x Second Hand and n Right Dial Hands move counterclockwise. When the end of a countdown is reached, the x Second Hand and n Right Dial Hands change direction and start moving clockwise to measure elapsed time after the end of the countdown. The elapsed time operation continues until you press Bto stop it.
ξThe maximum time measured by the elapsed time operation that starts after a countdown is complete is 23 hours, 59 minutes, 59 seconds.