CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
•Be sure to turn off the camera, computer, and all pe- ripherals connected to the computer (monitor, hard disk, etc.) before connecting the camera to the com- puter.
•After connecting the camera to the computer, slide the REC/PLAY selector to “PLAY”, and then turn on the camera. Data communication with a computer is dis- abled while the camera is in the REC mode.
•Never connect or disconnect the cable while a data communication operation is in progress. Doing so can cause problems with program execution, can corrupt data, and can damage the camera and your computer.
•Data transfer while camera batteries are low can re- sult in unexpected shutdown of the camera. Because of this, use of the optional AC adaptor is recom- mended whenever performing data communication with the camera.
•This camera does not support data communication with any of the optionally available CASIO PC link software applications:
Using a Memory Card to Transfer Image Data
In addition to the cable connections described in the previous sections, you can also exchange data between your camera and computer by reading it directly from the memory card. The Photo Loader software that comes on the bundled
The following provides general information about how to directly read images from a memory card. Certain details may be different depending on the type of computer you are us- ing.
■Computer Equipped with a CompactFlash Card Slot Simply insert the memory card into your computer’s CompactFlash card slot.