Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera. Next, press [SET] and then display the REC menu (page 66) or the PLAY menu (page 93).
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the camera to connect the
camera to your printer’s USB port.
• The camera does not draw power over the USB cable. Make sure the camera’s
battery is sufficiently
charged before connecting.
• Make sure that you insert
the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
• Note that even while the
connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.
• When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.
112 | Printing |
|