Using Flash (Flash)

1. In the REC mode, press [2] (

)

Flash

once.

 

 

 

2. Use [4] and [6] to select the flash

 

setting you want and then press

 

 

[SET].

 

 

 

• If there are no indicators on the

[2] (

)

monitor screen, you can cycle

 

 

through the flash modes by pressing [2] (

). You can turn display

information on or off by pressing [8] (DISP) (page 114).

> Auto Flash

Flash fires automatically in accordance with exposure

(amount of light and brightness) conditions.

 

?Flash Off Flash does not fire.

Flash always fires. This setting can be used to brighten a

<Flash On subject that normally comes out dark due to daylight or backlight (daylight synchro flash).

 

 

Red Eye

Flash fires automatically. This type of flash can be used to

¥

 

Reduction

reduce the chance of redness in the subject’s eyes.

3.Press the shutter button to shoot.

 

Back lamp

 

Flashes orange while the flash is charging to

VGAN

indicate that image recording is disabled.

STD

• You will not be able to take another flash

 

snapshot until the lamp stops flashing orange,

< indicates the flash will fire.

which indicates that charging is complete.

• For information about Flash Range, see page 140.

34

Snapshot Tutorial