PRINTING IMAGES

1.Press [MENU].

2.Select the “Set Up” tab, select “USB”, and then press [￿].

3.Use [￿] and [￿] to select the setting you want, and then press [SET].

When connecting to this type of

Select this setting:

device:

 

 

 

Computer or USB DIRECT-

Mass Storage (USB

PRINT-compatible printer

DIRECT-PRINT)

 

 

PictBridge-compatible printer

PTP (PictBridge)

 

 

•Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application).

•PTP (PictBridge) simplifies the transfer of image data to the connected device.

4.Check the battery level indicator to make sure that the batteries are fully charged, and then press the power button to turn off the camera.

•If battery power is low, replace the batteries or switch to AC power.

•To power the camera using AC power, you need to purchase an optionally available AC adaptor.

•The camera does not draw power over the USB cable.

187