1. Play back the movie you want to edit.
2. Press [SET] to pause playback.
• Check to make sure that “
” (cut icon) is displayed on the monitor screen. If it isn’t, press [SET] again.
Cut icon
3.Press [T].
•You could also perform the following steps in place of steps 1 through 3 above.
1In the PLAY mode, select the movie you want to edit
and then press [MENU].
2On the “PLAY” tab, select “Movie Editing” and then press [X].
4.Use [S] and [T] to select the cut operation and then press [SET].
•To cancel movie editing, select “Cancel” and then press [SET]. This will return to the paused movie playback screen.
5.Select the frame (point) where you want to cut the movie.
Cut range (red) | ||
|
| |
To do this: | Press this button: | |
Fast forward or fast reverse | [X] or [W] | |
playback | ||
| ||
|
| |
Pause or unpause movie playback | [SET] | |
|
| |
Scroll paused playback one frame | [X] or [W] | |
forward or back | ||
| ||
|
| |
•To cancel the cut operation, press [MENU]. This will return to the screen in step 3.
172
EDITING IMAGES