Casio EX-Z150, EXZ150PKEBC your Macintosh, Turn on the camera, that comes with the, 5.Turn on the camera, then use the USB cable, camera to connect it to, 4. Turn off the camera and

4. Turn off the camera and		USB port	USB cable
then use the USB cable
that comes with the
camera to connect it to		Large connector
your Macintosh.
• The camera does not draw
	power over the USB cable.
	Make sure the camera’s		Small connector
	battery is sufficiently
	charged before	USB/AV port
	connecting.
•	Make sure that you insert
	the cable connector into	Making sure that the 6 mark on the camera is
	the USB/AV port until you
		aligned with the 4 mark of the USB cable
	feel it click securely into
		connector, connect the cable to the camera.
	place. Failure to insert the
	connector fully can result
	in poor communication or
	malfunction.
•	Note that even while the connector is fully inserted, you
	still will be able to see the metal part of the connector
	as shown in the illustration.

• When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

5.Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.

6.Double-click the camera’s drive icon.7.Drag the “DCIM” folder to the folder to which you want to copy it.8.After the copy operation is complete, drag the drive icon to Trash.

9.On the camera, press [ON/OFF] to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer.

91Using the Camera with a Computer