3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].

4.Use [8] and [2] to select the city you want and then press [SET].

5.Press [SET].

IMPORTANT!

•Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 144).

Time Stamping Snapshots (Timestamp)

Procedure

[MENU] * Set Up Tab * Timestamp

You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.

• Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

Example: July, 10, 2012, 1:25 p.m.

Date

2012/7/10

Date&Time

2012/7/10 1:25pm

Off

No stamping of date and/or time

 

 

•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 119).

•Digital zoom is disabled while date stamping is turned on.

•Date stamping is disabled when certain BEST SHOT scenes are being used.

143

Other Settings (Set Up)