5.Use [4] and [6] to select a name, and then press [2].

6.Use [4] and [6] to select the priority level you want and then press [SET].

•You can set the priority to one of four levels: q (Disabled: no detection), and from þ (Low) to v (High).

7.To complete the setting procedure, press [MENU] twice.

NOTE

•To delete pre-recorded face data, perform steps 1, 2, and 3 of the above procedure and then press [MENU]. You can use the menu to select one face data record or all face data records (page 20).

•Formatting the camera’s built-in memory (page 129) deletes all the recorded face data.

To add a face data shot to an existing pre-recorded family member

Face recognition efficiency can be improved by recording three or four face data shots under various conditions for a single individual.

1.In the REC mode, press [SET].

2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition).

3.Use [4] and [6] to select “J Edit Family” and then press [SET].

4.Use [8], [2], [4], and [6] to select the thumbnail of face data to which you want to add another face data shot, and then press [MENU].

5.Use [8] and [2] to select “Add”, and then press [SET].

6.Perform steps 4 and 5 under “To pre-record the faces of family members, etc.” (page 33) to add the face data shot.

NOTE

•Camera memory can store face data for up to six individuals, and up to 12 face data items.

34

Snapshot Tutorial