Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
Available settings Control Panel
[8] [2] [4] [6] [SET]
1 2 
3 
4 5 
6 
7 
8 9
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 25, 73) | 6Face recognition (page 35) |
2Flash (page 28) | |
3Auto Shutter (page 30) | 8EV shift (page 42) |
4Auto Shutter trigger sensitivity | 9Date/Time (page 43) |
(page 32) |
|
5Continuous shutter (page 40) |
|
*Image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You can configure the camera to turn off display of the Control Panel when you press [SET] (page 125).
•You also can configure settings other than those listed above (page 60).
•The Control Panel cannot be displayed while a Prerecord Movie, For YouTube, or Voice Recording Operation is in progress.
24 | Snapshot Tutorial |
|