Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.

1.In the REC mode, press [SET].

This will select one of the Control Panel icons and display its settings.

[8] [2] [4] [6]

Available settings Control Panel

 

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

[SET]

9

 

2.Use [8] and [2] to select the setting you want to change.

1Image size/Quality* (pages 30, 79)

6Face Detection (page 40)

2Flash (page 33)

7Make-up (page 42)

3AF Area (page 35)

8easy Mode (page 43)

4ISO sensitivity (page 36)

9Date/Time (page 45)

5Continuous shutter (page 37)

 

*Snapshot image quality cannot be changed using the Control Panel.

3.Use [4] and [6] to change the setting.

4.If you want to configure another setting, repeat steps 2 and 3.

5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.

NOTE

•You can configure the camera to turn off display of the Control Panel when you press [SET] (page 138).

•You also can configure settings other than those listed above (page 62).

•The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie, For YouTube, or Voice Recording Operation is in progress.

B

29

Snapshot Tutorial