1.Use [8] and [2] to select the editing method you want to use and then press [SET].

2.Use [4] and [6] to scroll through the movie and search for the frame (point) from which or to which you want to cut the movie (the cut point).

•You also can search for the cut location by playing back the movie and pressing [SET] to pause. During playback, you can press [4] or [6] to perform fast reverse or fast forward.

Cut range (red)

3.When the frame where you want the cut point to be is displayed, press [2].

 

}

Cut

While the frame you want the cut to be up to is

 

(To-Point Cut)

displayed, press [2].

 

 

Cut

1While the frame you want the first (From) cut to be is

 

~

displayed, press [2].

 

(Point-To-Point Cut)

2While the frame you want the second (To) cut to be

 

 

 

is displayed, press [2].

 

 

Cut

While the frame you want the cut to be from is

 

¡

 

(From-Point Cut)

displayed, press [2].

 

 

 

 

4.Use [8] and [2] to select “Yes” and then press [SET].

The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy... Please wait...” message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long.

IMPORTANT!

•When you edit a movie, only the result is saved. The original movie is not retained. An editing operation cannot be undone.

90Other Playback Functions (PLAY)