Adding Audio to a Snapshot (Dubbing)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing

You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.

1.Press [SET] to start audio recording.

Remaining recording time

2.Press [SET] again to stop audio recording.

•Take care that you do not block the camera’s microphone with your fingers while recording.

•Good recording results are not possible when the camera is too far away from what you are trying to record.

•Your camera supports the following audio data formats.

– Audio Format: WAVE/IMA-ADPCM (WAV extension)

•

Adding audio (dubbing) is not possible for the following Microphone

 

types of images.

 

– Images created using MOTION PRINT

 

– Protected images

•

To delete audio, perform the following operation:

 

Dubbing * Delete * [SET] * [MENU].

IMPORTANT!

•Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

To play snapshot audio

1.In the PLAY mode, use [4] and [6] to scroll through the images until the Audio Snapshot you want is displayed.

An audio snapshot is one that has a ˆ icon.

2.Press [SET] to start playback.

109Other Playback Functions (PLAY)