APPENDIX

NOTE

The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad.

Never use the AC adaptor with a voltage converter.

3.Turn off the camera.

4.With the camera

positioned with the monitor screen facing forward as shown in the illustration, place it onto the USB cradle.

• Do not place the camera onto the USB cradle while it is turned on.

[CHARGE] lamp

The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green.

It takes about 130 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions.

5.After charging is complete, remove the camera from the USB cradle.

IMPORTANT!

Use only the battery charger (BC-11L) or the USB cradle (CA-32) to charge the special NP-20 rechargeable lithium ion battery. Never use any other charging device.

Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C30, AD-C40, AD-C620 and AD-C630 AC adaptors with this camera.

Make sure that the camera connector of the USB cradle is securely inserted into the camera’s connector as far as it will go.

236