■Setting the Playback Volume Level
You can use this procedure to set the playback volume level for movies and audio snapshots, independent of the operation tone volume.
1.Press [MENU].
2.On the “Set Up” tab, select “Sounds” and then press [X].
3.Use [S] and [T] to select “
Play”.
4.Use [W] and [X] to specify the operation tone volume setting you want and then press [SET].
•You can set the volume to one of eight levels in the range of 0 (lowest) to 7 (highest).
•Setting a volume level of 0 mutes the sound.
IMPORTANT!
•The volume setting you configure here does not affect the video output (page 131).
Turning the Startup Screen On or Off
You can configure the camera to display a startup screen of an image you recorded, whenever you turn it on.
•Even if you configure startup screen settings in the PLAY mode, the startup screen does not appear when turn on the camera by pressing [
] (PLAY).
1.Press [MENU].
2.On the “Set Up” tab, select “Startup” and then press [X].
3.Use [W] and [X] to scroll through the images until the one you want to use as the startup screen is on the monitor screen.
4.Use [S] and [T] to select the setting you want and then press [SET].
To do this: | Select this setting: | |
Use the selected image as the | On | |
startup screen | ||
| ||
|
| |
Turn off the startup screen | Off | |
|
|
B | 163 | OTHER SETTINGS |
|
| |
|
|
|