Small connector
USB/AV port
Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

4. Turn off the camera and

USB port

then use the USB cable

USB cable

that comes with the

 

camera to connect it to

Large connector

your Macintosh.

 

•The camera does not draw power over the USB

cable. Make sure the

camera’s battery is sufficiently charged before connecting.

• Make sure that you insert the cable connector into

the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

5.Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.

6.Double-click the camera’s drive icon.

7.Drag the “DCIM” folder to the folder to which you want to copy it.

8.After the copy operation is complete, drag the drive icon to Trash.

9.On the camera, press [ON/OFF] to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer.

115Using the Camera with a Computer